Outer Limits 4x4 Board

well i finally pulled my finger out and braced the tcase arms hopefully they hold up will prolly start on a TCASE BUCKET this weekend or next week

What are you planning on doing for transfer case mounts?

I've been busting them all the time and getting kind of tired of it. Have been looking at making the bucket myself as well but was hoping that a suzuki specialist out here is OZ would get plates lazer cut and sell a weld together kit.

Hint hint.

Something like this would be the go for a short side mount.

I assume you are breaking the single side mount, not the double with the arm??

i have been hinting for almost a year

ive only busted 2 rubber mounts the hole time i have had my zuk

if i start busting them more now ill just be a bit of rubber and run a bolt the hole way through it

I've busted the single short side arm mount (forwards motion) and also both of the double long side arm (rearwrds motion) mounts as well.

The main problem is with the short side arm.

Was thinking more like this.

I also want to lift the transfer case up about 3/4 inch which will mean that the jackshaft from the gearbox to transfer sits flat as it currently slopes down.

hey red that might hold up for a bit but f ur gonna stick with those mounts u will need to beef them up more as i did with mine and drill out the rubbers for bolts , since i did this no more probs, except for the long arm rear bolt keeps comming undone even with a nyloc nut..

this is what i built for mine...no probs yet... cost me $10 to make..

sierrajim
Wheeler


Joined: 11 Jun 2004
Posts: 656
Location: Melbourne
Posted: Sat Jan 29, 2005 9:33 am

--------------------------------------------------------------------------------

What are you planning on doing for transfer case mounts?

I've been busting them all the time and getting kind of tired of it. Have been looking at making the bucket myself as well but was hoping that a suzuki specialist out here is OZ would get plates lazer cut and sell a weld together kit.

Hint hint.

_________________
Almost stock standard sierra.

If you need one we have the Spidertrax ones in stock plus we are agents for Trail Tough products as well. Gonads can make custom units as well. Give us a call or PM if you are interested.

http://www.spidertrax.com/drivetrain_tcm.htm
http://www.trailtough.com/

Cheers,
Sean Lee
ABT 4x4 & M&M Custom 4x4
+61 2 6291 5994 ph
+61 2 6291 7286 fax
abtmaster@abt4x4.com
www.abt4x4.com – full online purchasing website coming soon!