Page 1 of 1
Nissan GU / GQ / MQ Big Rear Diff Ratios 10.5"
Posted: Wed Feb 02, 2005 5:03 pm
by Tuff Events
Hi all,
Does any body know what the highest ratio available for these models is
ie. 3.5 / 3.1 / 2.9 >>>>>>etc....
Thank
Pete
Posted: Wed Feb 02, 2005 5:25 pm
by ozy1
yuo will find the 4.88's are the largest in Auss, unless you are lookin to import from iceland or something,
Posted: Wed Feb 02, 2005 6:39 pm
by ljxtreem
anything over 5, busty busty
mock
Posted: Wed Feb 02, 2005 6:48 pm
by Daisy
READ THE POST CAREFULLY.
Talkin bout the highest ratio.. not the lowest.. GQ's came out with 3.9s.. but not sure if thats fir the big diff - i think thats the 4.3 for the big diff on the GQ's.. but what bout MQ's???
I know of some GQ's with 3.9 ratios as well
TOM
gears
Posted: Wed Feb 02, 2005 7:04 pm
by tuf045
i think that the 4.8 autos had 3.5 ratio in the gu
What are you putting portals on the cruiser?
Posted: Thu Feb 03, 2005 11:06 pm
by ozy1
GQ wrote:READ THE POST CAREFULLY.
Talkin bout the highest ratio.. not the lowest.. GQ's came out with 3.9s.. but not sure if thats fir the big diff - i think thats the 4.3 for the big diff on the GQ's.. but what bout MQ's???
I know of some GQ's with 3.9 ratios as well
TOM
shit, i was in another place at the time, it had been one of those days,
Re: gears
Posted: Fri Feb 04, 2005 1:16 am
by rOd
tuf045 wrote:i think that the 4.8 autos had 3.5 ratio in the gu
Man thats sux.
I thought my 3.9 was bad.
Re: gears
Posted: Fri Feb 04, 2005 11:59 am
by Tuff Events
tuf045 wrote:i think that the 4.8 autos had 3.5 ratio in the gu
What are you putting portals on the cruiser?
No not portals. possibly extra reduction in the hub....
hence the high ratio. Just thinking of relieving some stress from the
driveline.
3.5 would be ok. preferably around 3.0...... at least it would be genuine gear, so strength should be greater.
Pete.