can someone tell me if the chain transfer on my g52 (yes mine is a chain bloody sr5) will fit a r150 box...mines a manual shift vs the electronic on the r150 im lookin at
Jarrod
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
swapping electric chain transfer to manual chain transfer??
Moderators: toaddog, Elmo, DUDELUX
swapping electric chain transfer to manual chain transfer??
Last edited by zerosin on Sat Feb 05, 2005 5:31 pm, edited 1 time in total.
transfer case
hey jarrod
yep what spazbot sed
if you need a hand let me know ill drop around
im only around at medowie
i also have a spare gear tcase & chain tcase if you get stuck
daryl
yep what spazbot sed
if you need a hand let me know ill drop around
im only around at medowie
i also have a spare gear tcase & chain tcase if you get stuck
daryl
Jarrod
No, not as a straight swapover as the input shaft splines are different.
I had the very same problem wanting to use a new 4cyl electric transfer onto a R series. Refer para 3
Transfer
It can be done by swapping over the input shafts, which is a piece of cake, ie put the R150 electric transfer input shaft into your non electric transfer.
JD
No, not as a straight swapover as the input shaft splines are different.
I had the very same problem wanting to use a new 4cyl electric transfer onto a R series. Refer para 3
Transfer
It can be done by swapping over the input shafts, which is a piece of cake, ie put the R150 electric transfer input shaft into your non electric transfer.
JD
Re: swapping electric chain transfer to manual chain transfe
Jarrodzerosin wrote:can someone tell me if the chain transfer on my g52 (yes mine is a chain bloody sr5) will fit a r150 box...mines a manual shift vs the electronic on the r150 im lookin at
Jarrod
Mate I assumed you were looking at an R150 that had an electronic transfer as you mentioned above and needed to know if you could use your non ADD transfer on this R150.
But now you indicate you are going to look for one
and do the input shaft swap.
If you haven't actually got an R150 with an electric V6 transfer then don't look for one of these
There's no need to swap your input shaft to get a non ADD transfer if you haven't already got an electric transfer.
Just get a R150 with the non ADD chain transfer from an early model RV6 4Runner.
Then sell yours to cut the costs
.
Skootin.
No can do as these gear transfer housings will not directly bolt up to a R series trans. Only way is to use a Marks adapter plate or a USA 86/87 22R EFI housing.
JD
zerosin wrote:does anyone know what year model RV6 had the manual shift chain case behind the r150??
Definately the 91-94's.
I think it was around 95 Toyota started to fit some of the SR5 extras to RV6's and although I'm not positive some may have also got ADD. If you check the wreckers for 91-94's you should be OK but they will know the difference between ADD and non ADD anyway.
JD
Who is online
Users browsing this forum: No registered users and 3 guests