Outer Limits 4x4 Board

Hey guys i have a Wt zook with bascily 2 stuffed diffs and i need to know will narow track 1300 diffs fit coz im having alot of problems sausing wt ones Plus wt are like twice the price.... and doz any one have any????????? especaily with lockers 4sale??
chears
Phil

from what i know the spring mounts are diffrent and your wheels would sit in to far you would need to take your flares off have youput a wanted add on here ive seen a lot of zuk diffs for sale l8ly

the 3:9 centres from a NT 1.3 will fit in yours, if thats what you mean, but not the entire NT diff/axle assembly, as spring perches are wrong. could be made to fit, but quite bit of work for a backwards step.
I think lockers are the same for wt 3:7 and NT 3:9
did you bend yours by launching or something ???
christover

he means diff centers

mud runner = stuffed bearings:P

redzook wrote:he means diff centers

mud runner = stuffed bearings:P

mud is gay

yer so basicly 3.9 Nt centers will fit in to my housings and the axels will go in easy aswell??? what about the front thogh?? coz mine has a buggerd front diff, and blow up back.... becasue i have been told the axels are diffrent in the front...... this is confusing.......
and MUD IS GOD

well yeah the axles will be different, one will be longer than the other

yer i have the axels But are the Splines still the same? this is the hard part.

Red_Zook wrote:yer i have the axels But are the Splines still the same? this is the hard part.

front splines are different to back splines.
but NT and WT splines are the same.
you will need to change over the yokes, or redrill bolts pattern.
NT yokes and WT yokes are interchangeable. I'm told.
bit hard to get nut off sometimes, tho.
christover

be sure not to use a NT 1.o litre 4:1 diff, tho, they won't fit. christover

make sure you put extended breathers on your diffs, makes them less likely to suck in mud, therefore last much longer.
christover

Ok so what u r saying is i can get a set of Nt 1300 centers and bang em strati in to my zook?

Red_Zook wrote:Ok so what u r saying is i can get a set of Nt 1300 centers and bang em strati in to my zook?

yes, but change over the yoke/input of the diff to match the tailshaft bolt pattern, or change end of tailshaft to match diff bolt pattern.
Not done it myself, but helped a mate do it in his.
He needed a rattle gun to get the nut off the yoke.
christover

I put a nt front centre in my front wt diff just changed the yoke.

chears guys, i know a bit about the tailshaft thing coz i orederd a second hand shaft from the wreckers up north and they send me a nt one... the splines are the same so i will just get a front nt one and use half and half with mine if that makes sence to u. i will let u know how i go
chears fellaz
Phil