Outer Limits 4x4 Board

I'm after a set of wheels and would like to get some 17" x 11 aluminium wheels with aluminium beadlocks made to suit 6 stud hilux, with a decent offset.
if i buy a set of bling bling mags, can i get them modified to take beadlocks? This might be cheaper?

There are plenty of 17" x 10 wide mags out there, is it true that when you modify a wheel by fitting beadlocks they get a little wider? If this is the case i may only need 17"x 10"s.
i'm looking at buying a set if 37x14x17 IROKs and they specify 17" x 11" wheels to run em.

This is for the buggy so RTA etc rules need not apply.

Chris

CoreLoks

http://core4x4.com.au/CORELOKS_beadlocks.htm

Phone: 0402 842 989 or 0412 615 569


Fax: (07) 3297 6212

cheers, i'll shoot them an email.

any others?

Ifg you can find someone to spin up the rings i know a guy that can Tig weld them on for you. Actually at the moment he prob cant but within a few weeks he should be confident enough with a tig welder.

Its funny because his name is Chris just like yours

roc70y wrote:cheers, i'll shoot them an email.

any others?

Im still waiting to hear back from an email i sent
to them over 3 weeks ago.

RUFF wrote:Ifg you can find someone to spin up the rings i know a guy that can Tig weld them on for you. Actually at the moment he prob cant but within a few weeks he should be confident enough with a tig welder.

Its funny because his name is Chris just like yours

You don't even need to get them machined, you can get them laser cut the same as the steel ones!

I have a contact for twin bead mechanical rims that come in a variety of crazy patterns...steel though, but any color.