Page 1 of 1
Barred up
Posted: Mon Feb 14, 2005 6:56 pm
by Toos
Made up some sliders and a rear bar cost about $80 all up. Let me know what you think.
Posted: Mon Feb 14, 2005 6:57 pm
by Toos
Forgot the pic of the sliders.
Posted: Mon Feb 14, 2005 7:12 pm
by nicbeer
look sweet. Got any pics on how you mounted and made the sliders? I like the rear bar, are they led lights?
Posted: Mon Feb 14, 2005 7:12 pm
by OldGold
sliders look good, why did you change the rear bar?
Posted: Mon Feb 14, 2005 10:14 pm
by DiddyZook
Toos, they look great. $80 is cheap, had I seen them in a catalogue with a bigger price I would not have been surprised. The new lights in the rear bar must have contributed a bit to the price.
Same as nicbeer asked, please show some photos of how you have mounted these. Is that a tow coupling in the centre of the rear bar?
Posted: Tue Feb 15, 2005 8:33 am
by Mudzuki
Looks good, nice and different with that rear bar

Posted: Tue Feb 15, 2005 4:47 pm
by Toos
The led's cost $60. Igot the steel for free. The bar is a lot stronger than oe and can use my hi-lift on any of the three points in the bar and the middle one doubles as a recovery point. the bar is mounted to the same points you'd mount a towbar on and the sliders bolt to the outriggers on the chassis.
Posted: Wed Feb 16, 2005 11:02 am
by wildchild1066
looks good
Posted: Wed Feb 16, 2005 12:10 pm
by Pinball
Toos wrote:The led's cost $60. Igot the steel for free. The bar is a lot stronger than oe and can use my hi-lift on any of the three points in the bar and the middle one doubles as a recovery point. the bar is mounted to the same points you'd mount a towbar on and the sliders bolt to the outriggers on the chassis.
The LED's cost what???... is that total for all?... best price i got so far has been 140 odd each....
Posted: Wed Feb 16, 2005 6:07 pm
by Toos
$60 from a truck spares shop in townsville.
tville spares
Posted: Thu Feb 17, 2005 12:59 pm
by Pinball
This was for all lights or 60 each?...
what brand, which shop?
Am in middle of doin new rear bar meself so lighting replacement required..
Spock
Posted: Thu Feb 17, 2005 5:52 pm
by Toos
$10 each from Tony truck spares the lights are baxters
Posted: Fri Feb 18, 2005 11:33 am
by Mudzuki
Toos wrote:$10 each from Tony truck spares the lights are baxters
Thats damn cheap for LEDS
blow me
Posted: Fri Feb 18, 2005 12:32 pm
by Pinball
That is sax on legs m8....
neat lookin barwork... and have just talked to Tony's... they have wild LED pricing..
You got me hot.. they just finished it off.....
Spock