Page 1 of 1
rear springs
Posted: Mon Feb 14, 2005 7:55 pm
by built4thrashing
does anyone have the measurements of feroza rear springs eye to eye or even the distance between the hangers?
Posted: Mon Feb 14, 2005 9:42 pm
by Spartacus
on the rocky the were 110'' an 60mm wide...i think
im thinkin on gettin 1tonne rodeo rears all round
112" long 60mm wide
Posted: Mon Feb 14, 2005 10:34 pm
by Dangerous Dave
Howdy,
Here is the Rear Suspension Spec Page from the manual. It is a zipped .doc file. Let me know if it doesn't work and i'll make it a picture and post that.
Dave
Posted: Mon Feb 14, 2005 10:37 pm
by Dangerous Dave
Here's a JPEG version too just incase.
Dave.
Posted: Tue Feb 15, 2005 6:33 pm
by built4thrashing
would you have the dimensions of the front rocky springs?
Posted: Tue Feb 15, 2005 7:13 pm
by Dangerous Dave
No... however someone on here is hosting a rocky manual availiable to download. I can't remember who. Try Murcod (Dave) i'm sure he knows who it is. Send him a PM.
Dave
Posted: Tue Feb 15, 2005 7:46 pm
by Dangerous Dave
No Worries too by the way. Didn't ya mumma teach ya any manners.
Dave
Posted: Tue Feb 15, 2005 8:42 pm
by built4thrashing
thanx guys
looking at putting these rear springs in a sierra as they seem longer. do you know if you can get them aftermarket with a lift?
Posted: Tue Feb 15, 2005 9:07 pm
by Dangerous Dave
Yeah, If you are in SA go and talk to the guys at Industrial Springs. They'll custom make them for you for a reasonable price. You tell them exactly what you want and they'll do it. If not talk to Murcod. Is is the spring guru when i comes to suppliers or do a search on here for springs cause that has been a few threads on them prior to this one.
Dave.