Page 1 of 1
Holden V6 engine numbers location and explanation.
Posted: Tue Feb 15, 2005 8:38 pm
by brett43au
Hi I just bought a Rodeo with VP comodore motor in it . Does any one know where the engine number is on a VP motor. The Rego has a number of VH 1088340 but the only number I can find on the block under the water pump is 25533496.
Any help is apreciated.
Posted: Tue Feb 15, 2005 8:43 pm
by CRUSHU
ah ha! this is right up my alley. 25533496 is a casting number (similar to a part number) on the timing cover. the VH number is the engine number.
If I remember, I will try and find out what car it came from for you tommorrow.
V6 engine number
Posted: Tue Feb 15, 2005 8:52 pm
by brett43au
Thanks
Any idea where I should look for the engine number ? I even tried with a mirror but could not see anything.
Posted: Tue Feb 15, 2005 8:53 pm
by CRUSHU
I will find it tommorrow on the computer at work.
Posted: Tue Feb 15, 2005 9:28 pm
by hophoar
the engine number should be under the head on the right hand side of the front ofthe motor. can be a bitch too see, had to pull my radiator out to get the numbers once as I had washed the paper with the numbers on it after installing the motor.
V6 engine number
Posted: Tue Feb 15, 2005 9:48 pm
by brett43au
Thanks sorry to ask what may be a dumb question but on the right side under the power stearing pump or on the right side when looking at the front of the motor from the front of the car.
Thanks.
Posted: Tue Feb 15, 2005 10:39 pm
by carts
Its on the right side of the motor looking at the front. Its actually on the front of the motor. Its pretty hard to see. It is not a cast number. Its stamped with lots of little dots. I believe VH is actually a VS engine number, but I may be wrong.
Posted: Tue Feb 15, 2005 10:54 pm
by I.M.P.O.S.E
carts wrote:Its on the right side of the motor looking at the front. Its actually on the front of the motor. Its pretty hard to see. It is not a cast number. Its stamped with lots of little dots. I believe VH is actually a VS engine number, but I may be wrong.
My VP has a VH.... engine number.
Posted: Wed Feb 16, 2005 9:29 am
by carts
I.M.P.O.S.E wrote:carts wrote:Its on the right side of the motor looking at the front. Its actually on the front of the motor. Its pretty hard to see. It is not a cast number. Its stamped with lots of little dots. I believe VH is actually a VS engine number, but I may be wrong.
My VP has a VH.... engine number.
My VS had a VH number also. Consider me corrected.
Posted: Wed Feb 16, 2005 9:49 am
by Shorty40
If you dont want to pull your radiator out you can see it if you remove a pulley or 2

Posted: Wed Feb 16, 2005 10:34 am
by CRUSHU
ENGINE SERIAL NUMBERS — V6 ENGINE
DA. DOMESTIC. 16. VP
THE ENGINE SERIAL NUMBER IS STAMPED ON THE FRONT LEFT HAND FACE OF
THE CYLINDER BLOCK BELOW THE IGNITION COIL.
ENGINE SERIAL NUMBERS ARE PREFIXED BY ‘‘ VH’’ AND COMMENCE AT 1000001
AND RUN IN CONTINUOUS SEQUENCE.
ENGINE SERIAL NUMBERS — V8 ENGINE
THE ENGINE SERIAL NUMBER IS STAMPED ON THE CYLINDER BLOCK IN LINE
WITH THE OIL LEVEL INDICATOR TUBE.
ENGINE SERIAL NUMBERS ARE PREFIXED BY: ‘‘ VU’’ 5. 0 Litre PFI
EFFECTIVE: 1/ 95
‘‘ VU’’
Posted: Wed Feb 16, 2005 11:53 am
by CRUSHU
As quoted in the parts computer.
No luck finding the particular car the engine is from, must be too old for our system.
All n/a V6's have a VH prefix, upto VY.
All supercharged V6 are VS prefix.
Posted: Wed Feb 16, 2005 12:02 pm
by brett43au
Thanks for the help .