Outer Limits 4x4 Board

Where can you get 16" rims with a sierra stud pattern? What options are there if someone to fit 31x9.5-16's? Can you get, say, 16x7 sunraysias with a bit more than std offset, off-the-shelf? Some sort of vitaaaaara wheels maybe? Or do you call eastern wheel works, get a price, and decide on 15's after all?

munga wrote:Can you get, say, 16x7 sunraysias with a bit more than std offset, off-the-shelf?

Yes, check www.speedywheels.com.au that site has measurements, offset info etc.

munga wrote:Some sort of vitaaaaara wheels maybe?

Vit rims may be an option, but in stock form may not have the offset you require.

Is there any reason you particularly want to go with 16s? If you really need to then I think the cheapest & easiest is going to be to buy a new Sunraysia etc off the shelf.

Grand Vitara have 16" rims... get em, have someone flip the inside around and voila! mega offset and fancy rims =)

But yeh if its steel sunraysia style ones, go for speedy rims - theyre cheap as! If youre in Perth i can hook you up with some super cheap....

I put my GV rims on a sierra and the offset was spoton the edge of the flare . I have also put 16" GV rims on my Vitara, the offset is perfect.

I used to have the old 16 x 5" rims from a LJ on my Zuk. I had them widen to 6.5 by using the centre form the zuk rim and used the outer form a Lada Niva rim. With these I used to run 7.00 x 16 SATs

RIKSTR wrote:I put my GV rims on a sierra and the offset was spoton the edge of the flare . I have also put 16" GV rims on my Vitara, the offset is perfect.

You wouldn't happen to have measured the offset of the GV rims would you?