wanted wiring diagram for swift sedan 1991 g1.6b tbi
Posted: Sun Feb 20, 2005 4:27 pm
anyone got a wiring diagram for the above????
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
wanted wiring diagram for swift sedan 1991 g1.6b tbi
Page 1 of 1
Posted: Mon Feb 21, 2005 4:00 pm
ttt
Posted: Mon Feb 21, 2005 4:02 pm
Posted: Mon Mar 28, 2005 4:18 pm
Did you have any luck finding a diagram ??
I can't find one & need it to get the zuk running.
Thanks drew
I can't find one & need it to get the zuk running.
Thanks drew
Posted: Mon Mar 28, 2005 9:05 pm
Drew wrote:Did you have any luck finding a diagram ??
I can't find one & need it to get the zuk running.
Thanks drew
na mate ended up paying overkill engineering's auto electrician to wire it
Posted: Mon Mar 28, 2005 9:25 pm
While we are on the subject does anyone have a Computer and Harness for one of these. Allready have the manifold and Throttle Body just need a computer and Harness. Could use an aftermarket computer but realy dont want to spend that sort of money. Or has anyone used another computer to run this. Maybe Camira or Pulsar?
Posted: Mon Oct 24, 2005 9:33 pm
Im currently grafting 1.6l swift TBI to my 87 sierra, and have come up with a few ?'s im hoping you guys could help me out with 
First some background info:
my rig is a total stocker(actually if you count the rust n dings its less than stock)
As i live in the country Donor vehicles where a bit scarce so i had a Suzuki wrecker in perth send me up the harness n throttle body.
I managed to find a wiring diagram on a GTIswift forum which was good!
I have made an adapter for my manifold to suit the TB its suprising how well everthing lines up ie Accelerator cable is spot on! and water lines are about as good as you could ask for on a bastardised rig.
Now onto the ?'s
1. Can i use my coil as the one i got with the harness has a big ding in it?
2.The loom has a speed sensor wire goin to the instrument cluster for economy i guess, and my / is can my cluster be mod'd similar to hen doin a 13B swap to take advatage of this ?
3.I have a set of headers to fit also as i need to weld in a plug for the O2 sensor i though it be a good opertunity to fit em they are Lukey 4-2-1 where is the best spot to fit it? any opinions?
i have a few more ? but they can wait for now
Cheers any help would be most appreciated
First some background info:
my rig is a total stocker(actually if you count the rust n dings its less than stock)
As i live in the country Donor vehicles where a bit scarce so i had a Suzuki wrecker in perth send me up the harness n throttle body.
I managed to find a wiring diagram on a GTIswift forum which was good!
I have made an adapter for my manifold to suit the TB its suprising how well everthing lines up ie Accelerator cable is spot on! and water lines are about as good as you could ask for on a bastardised rig.
Now onto the ?'s
1. Can i use my coil as the one i got with the harness has a big ding in it?
2.The loom has a speed sensor wire goin to the instrument cluster for economy i guess, and my / is can my cluster be mod'd similar to hen doin a 13B swap to take advatage of this ?
3.I have a set of headers to fit also as i need to weld in a plug for the O2 sensor i though it be a good opertunity to fit em they are Lukey 4-2-1 where is the best spot to fit it? any opinions?
i have a few more ? but they can wait for now
Cheers any help would be most appreciated
Posted: Mon Oct 24, 2005 10:40 pm
Going by this article
http://www.pirate4x4.com/forum/archive/ ... 05593.html
It seems that the 1.3tbi and 1.6tbi are the same in wiring and etc. thinking that using the usa samarai diagram would be ok.
cheers
http://www.pirate4x4.com/forum/archive/ ... 05593.html
It seems that the 1.3tbi and 1.6tbi are the same in wiring and etc. thinking that using the usa samarai diagram would be ok.
cheers
Posted: Mon Oct 24, 2005 10:42 pm
Coil: as long as it looks th same, maybe go for a sports coil if not like a bosch one.
cheers
cheers
Posted: Wed Oct 26, 2005 9:44 pm
Cheers Nicbeer
[/quote]2.The loom has a speed sensor wire goin to the instrument cluster for economy i guess, and my ? is can my cluster be mod'd similar to when doin a 13B swap to take advatage of this ?
3.I have a set of headers to fit also as i need to weld in a plug for the O2 sensor i though it be a good opertunity to fit em they are Lukey 4-2-1 where is the best spot to fit it? any opinions? is it OK to fit down the bottom at the last junction ?
Any one with any thoughts?
[/quote]2.The loom has a speed sensor wire goin to the instrument cluster for economy i guess, and my ? is can my cluster be mod'd similar to when doin a 13B swap to take advatage of this ?
3.I have a set of headers to fit also as i need to weld in a plug for the O2 sensor i though it be a good opertunity to fit em they are Lukey 4-2-1 where is the best spot to fit it? any opinions? is it OK to fit down the bottom at the last junction ?
Any one with any thoughts?