Outer Limits 4x4 Board

just wondering if anyone round south east queensland (northern nsw) has the nitrogen tank and regulator required to setup airshocks with? we'll be requiring one soon for a week or so to set them up and fine tune.

if anyone has the gear let me know and $$$'s and/or alcohol can be arranged

antt wrote:just wondering if anyone round south east queensland (northern nsw) has the nitrogen tank and regulator required to setup airshocks with? we'll be requiring one soon for a week or so to set them up and fine tune.

if anyone has the gear let me know and $$$'s and/or alcohol can be arranged

hi antt . i think rod or the boys at haulteck has one .i have one as well . iv'e regased my fox airs about 4 times now thats 4 out off 5 trips out wheelin .

humphey wrote:iv'e regased my fox airs about 4 times now thats 4 out off 5 trips out wheelin

is that cause of leakdown or just fine tuning

antt wrote:

humphey wrote:iv'e regased my fox airs about 4 times now thats 4 out off 5 trips out wheelin

is that cause of leakdown or just fine tuning

the nitro shoke's into the oil thus losein height and the need to regas . mine haven't droped any more and workind fine . what are the goin into ?

humphey wrote:

antt wrote:

humphey wrote:iv'e regased my fox airs about 4 times now thats 4 out off 5 trips out wheelin

is that cause of leakdown or just fine tuning

the nitro shoke's into the oil thus losein height and the need to regas . mine haven't droped any more and workind fine . what are the goin into ?

cool, knew about the initial mixin with the oil, good to hear they're stable now. they're Swayaway's front and back on a mates cruiser....not a daily driver, but will be seeing the road. got the front pretty much done today, will post pics

soooo anyone got a tank and reg

a pic

Ive got a tank and reg. So I could do whatever.

What are you guys wanting?? Are you wanting sombody to set them up or do you just want to use my tank and reg?

Sam

Just reread the first post - I wouldnt lend you my setup for a week or so.

Sam

thanks for the offer sam, looks like we'll have to buy one cause of the initial leakdown and whatnot to get them sorted properly.

antt wrote:thanks for the offer sam, looks like we'll have to buy one cause of the initial leakdown and whatnot to get them sorted properly.

Probably the best bet cause they arnt the sort of thing that you just set up once and then forget about them.

Sam

ok then, next question. wheres the best place to buy the regulators from? we've got a price on the setup from polyperformance, but something similar available here in aus???

Bought mine from place in Moss St just on the top side of the dog bend - Peal Industries i think.

Think the reg cost $350 or something.

Got the hose and fittings from just around the corner from them - may have been Enzed or some place similar.

Sam

is it a special fitting needed or just the std nitro reg and hoses ???

coz i use them all day at work they not that expensive hey, i could probly get u a reg and that fairly cheep if u find out wot u need ??

Any supplier of hydraulic equipment should be able to sell you a Nitrogen precharging kit as the gas fitting/connection is the same system used on Hydraulic accumulators.

Wally.