Outer Limits 4x4 Board

Posted: **Wed Feb 23, 2005 10:39 pm**

ARB have come to the rescue it only took 20yrs a steel winch bar for 40ser similar to jeep bar but big tube rec retail $730. Looks good low mount winch only I believe

Posted: **Thu Feb 24, 2005 7:43 am**

pics

Posted: **Thu Feb 24, 2005 9:48 am**

yea... pics please.

Posted: **Thu Feb 24, 2005 5:37 pm**

sorry about size and quality but here it is

Posted: **Thu Feb 24, 2005 5:58 pm**

heres the one i made

Posted: **Fri Feb 25, 2005 11:01 am**

Barstads!!!!!!!!

That is what mine looked like before I chopped it down!

Should have patented it!

What are they charging for it?

Posted: **Fri Feb 25, 2005 12:26 pm**

skootin wrote:ARB have come to the rescue it only took 20yrs a steel winch bar for 40ser similar to jeep bar but big tube rec retail $730. Looks good low mount winch only I believe

Posted: **Fri Feb 25, 2005 12:41 pm**

+dj_hansen+ wrote:
skootin wrote:ARB have come to the rescue it only took 20yrs a steel winch bar for 40ser similar to jeep bar but big tube rec retail $730. Looks good low mount winch only I believe

Mine cost less than that, but I didn't have the tube on top.

Posted: **Fri Feb 25, 2005 3:40 pm**

where are you supposed to put the number plate????

Posted: **Fri Feb 25, 2005 7:38 pm**

a187luv, you are a thinker!!!!! you dont have one???

im still hung up on the price!!!! thats not really a cheap bar for its size. price should be in perspective with the car its for!!!!

$200! they are for 40s!

Posted: **Fri Feb 25, 2005 9:39 pm**

DIRTY ROCK STAR wrote:a187luv, you are a thinker!!!!! you dont have one???

im still hung up on the price!!!! thats not really a cheap bar for its size. price should be in perspective with the car its for!!!!

$200! they are for 40s!

Especially when the full size bar cost $770 in 03 when i got mine from arb .
doesn't leave much for protection plus if u wanted your forty to look like a jeep ya should of bought one

Posted: **Mon Feb 28, 2005 8:56 am**

Tidy42 wrote:
DIRTY ROCK STAR wrote:a187luv, you are a thinker!!!!! you dont have one???

im still hung up on the price!!!! thats not really a cheap bar for its size. price should be in perspective with the car its for!!!!

$200! they are for 40s!

Especially when the full size bar cost $770 in 03 when i got mine from arb .
doesn't leave much for protection plus if u wanted your forty to look like a jeep ya should of bought one

Right on the money boys! (excuse the pun!) $770 is out of the question for me, guess i'll have to do a welding course and come up with a FABulow-so bar with number plate holder!

Posted: **Mon Feb 28, 2005 12:25 pm**

can we get other posts/pics of front bars for the 40? I need to look at replacement for my farmgate after using it as a plow.

something that can accommodate 2 sets of spots and a cat

how about something like this?

Posted: **Mon Feb 28, 2005 12:28 pm**

something that can accommodate 2 sets of spots and a cat

dood! you still got that cat! i worry about you boy!

hey i'm off to sydney this wed, still wanna swap the soft top?

Posted: **Mon Feb 28, 2005 9:00 pm**

shorty_f0rty wrote:can we get other posts/pics of front bars for the 40? I need to look at replacement for my farmgate after using it as a plow.

different tyres - thats why it looks different see
less is more with a 40 and yes there is a difference in protection
but...

cheers scottO

Posted: **Mon Feb 28, 2005 10:16 pm**

80ser bars are a good starting point

Posted: **Thu May 05, 2005 10:26 pm**

eddie wrote:heres the one i made

thats how i want mine... is the winch a low mount 9000 warn winch

Posted: **Fri May 06, 2005 9:39 am**

more power wrote:
eddie wrote:heres the one i made
thats how i want mine... is the winch a low mount 9000 warn winch

sure is a warn xd9000
tell me if u want any more photos

Posted: **Fri May 06, 2005 10:39 pm**

eddie wrote:
more power wrote:
eddie wrote:heres the one i made
thats how i want mine... is the winch a low mount 9000 warn winch

sure is a warn xd9000
tell me if u want any more photos

yes plz....

Posted: **Sat May 14, 2005 10:41 pm**

more photos

Posted: **Sat May 14, 2005 10:43 pm**

1 more

Posted: **Sat May 14, 2005 10:57 pm**

the last pic didnt work for me
man your bar looks professional made
did u plasma cut the steel out....
what thinkness was the steel used

Posted: **Sat May 14, 2005 11:06 pm**

center part is made from 6mm C setion and the rest of it 4mm

used a grinder and cutting wheel

Posted: **Sun May 15, 2005 10:12 pm**

Posted: **Mon May 16, 2005 10:22 am**

Nice bar Eddie.

Here's mine before and after. Made out of C Channel cost under $30.

Posted: **Mon May 16, 2005 4:57 pm**

ray185 your bar looks heaps better now

Posted: **Mon May 16, 2005 6:19 pm**

There is something I like about your (edit

) BULL bar Ray185 but I can't quite put my finger on it

Posted: **Tue May 17, 2005 12:48 pm**

bj42turbo wrote:There is something I like about your bar Ray185 but I can't quite put my finger on it

Lets keep it that way or my wife will kick your ass!

Posted: **Wed May 18, 2005 12:57 pm**

i've juat got a modifed stock bar. does the job and with the wider gaurds give's a bit off an idea were they are. but i want tube

Posted: **Wed May 18, 2005 1:05 pm**

i want to do similiar to this, but it all comes with time

Outer Limits 4x4 Board

At last 40ser bullbar PICS Added

At last 40ser bullbar PICS Added

pics

Re: At last 40ser bullbar PICS Added

Re: At last 40ser bullbar PICS Added

t

Re: t

Re: t