Outer Limits 4x4 Board

Checked out the price on flexi flairs from Clark rubber, $29.95mt. Is this the average price? I need 4mt to do my 4b so at this price I'm looking at $120.

Some blokes have been using garden edging from Bunnings. I'm sure it's cheaper, but probably stiffer.

Call procomp, they sell it off a roll, me thinks it was cheaper than that? Can't quite remember, ahhhh only prob is they're in Melb.....

I thought I was expensive at $17 a metre for 65 mm stuff.

LudaCris

are you getting the tensioned wire for that price too? i got about 2x boxes ofBushranger Flexi Flares from TJM, each with 2 meters of 65mm flare and the wire that goes through it for $55 per box

I got a box of Bushranger 65mm with the wire reo from ARB for about $95.
Did all the arches on the Mav plus about 6" left over.

Bazzle

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=32972

Theres some pics there of my flares which i made from bunnings lawn edging, they are stiff not flexy but you can get a 10m roll of 75mm wide stuff for $18.

I bought mine from procomp in narre warren.

$10 a metre for the 65 - 70mm stuff. includes about 2m of stainless wire to poke in the ends, to hold the shape. was on special last month.

Dude your clark rubber has almost double the price of ours in Vic.

The 65mm stuff down here is about $16 a metre.

I used lawn edging, $18 for 10 meters, worked well.

Dave.

in fact, if you buy it direct from the supplier, it is only a couple of bucks a metre, on a 50m roll

bazzle wrote:I got a box of Bushranger 65mm with the wire reo from ARB for about $95.
Did all the arches on the Mav plus about 6" left over.

Bazzle

i got the same as this and paid about $100 from Kmart a while back

alrob wrote:are you getting the tensioned wire for that price too? i got about 2x boxes ofBushranger Flexi Flares from TJM, each with 2 meters of 65mm flare and the wire that goes through it for $55 per box

No wire for that price, supply your own Now I'm glad I asked else I would have just ripped myself off. Thanks people

diesel028 wrote:[
i got the same as this and paid about $100 from Kmart a while back

I bought some from Kmart about 3 years ago for my old 4wd (feroza) for $60.

CRUSHU wrote:in fact, if you buy it direct from the supplier, it is only a couple of bucks a metre, on a 50m roll

So you know any suppliers in Sydney

Nev62 wrote:

CRUSHU wrote:in fact, if you buy it direct from the supplier, it is only a couple of bucks a metre, on a 50m roll

So you know any suppliers in Sydney

I know the supplier is in Dandenong or hallam somewhere, but i couldn't be bothered looking. thats why i bought it from procomp for $10 / meter

Go with lawn edging from bunnings.. like $25 for a 10m roll

I've been through the Bunnigs route, and that worked well. After cutting my guards I looked everywhere for another solution. Ended up going back to Clark Rubber for their $10.95/m wider stuff with the hole for the wire. Look in my member's thread for more info.

Heathx4 wrote:I've been through the Bunnigs route, and that worked well. After cutting my guards I looked everywhere for another solution. Ended up going back to Clark Rubber for their $10.95/m wider stuff with the hole for the wire. Look in my member's thread for more info.

Is this the price still around the traps? Just peeved my local Clark Rubber is charging $29.95