Outer Limits 4x4 Board

Hey guys i am getting 33's so i am doing body lift on my MQ LWB so i need 10 ,Blockss and bolts..

What Diameter Alloy do I need.. Does 60.5mm sound too small? or what is reccomended... Also does anyone know where i can get some material on the weekend for it? i can get Bolts not a Problem... Just Blocks...

Cheers Stewie

you will also need to extend your hydraulic clutch cable aswell and bend the transfer case shifter

Cheers Insane i will have keep this in mind when i am doing it

as it has been said before MQ/MK unless they have totally shagged suspension don't need a body lift to fit 33's......

Try them on without the body lift and you will be suprised to see that I am right.......And if I am wrong your suspension is stuffed and you should be spending money on that and not the body lift anyway.......

My two cents....

cheers

James

Well I DO agree james... I intend putting them on with no B/Lift BUT.. As almost everyone else on here has said a 2" body lift will stop it rubbing at flex.. THeres the reason for the lif and also the bent side steps Ect...


But i just really need to know how round (Diameter) of alloy rod..

My 33's never rubbed anywhere and I had a sagged 2in lift on mine....

I would go with about 65mm for the blocks and I prefered metal or alloy

65mm is about the same diameter as the rubber......

You never mentioned anything about more side step clearance.......I still prefer suspension and would only go body lift to clear larger tyres than 33's....

but whatever works for you......

cheers

James

Cheers James...

I am gonna do springs Ect.. But i got a trip away with a couple of mates so money says boody lift B4 trip and springs after ..

I was looking at alloy.. So 65mm...

Thanks for the info Mate Muchly appricated( spelling??)

Cheers Stewie