Page 1 of 1
The sliders are on :)
Posted: Sun Feb 27, 2005 9:36 pm
by Tiny
Just got a set of funky sliders on the GQ ofj Jeremy, Impact Offroad ( Surfection on this board ) fitted today, and went for a strap on some nice rock steps in a secret location to test them out.....bent both quarters
, and the sliders came off unmarked
, top job.
These things are as good as the Snake ones, and at $750 fitted, I wouldn't go past them, and they are sealed so can use as air tanks as well. let me know if pics are required.
Cheers Jeremy for a bloody well done job, when I chop the quarters I will come and see for a rear bar, and a cheezy style winch bar when funds allow
Tiny
Posted: Sun Feb 27, 2005 9:40 pm
by adam.s
pics sounds good
Posted: Sun Feb 27, 2005 9:40 pm
by ozy1
pics required plz
Posted: Sun Feb 27, 2005 9:43 pm
by Screwy
would love some also
Posted: Mon Feb 28, 2005 7:20 am
by Tiny
Screwy_ScrewBall wrote:would love some also
Pics or sliders????? will post some tonight
Posted: Mon Feb 28, 2005 2:34 pm
by KIWI
You can post me some sliders
Posted: Mon Feb 28, 2005 2:39 pm
by Tiny
Posted: Mon Feb 28, 2005 4:07 pm
by MARKx4
When are we getting pics
Posted: Mon Feb 28, 2005 4:31 pm
by Tiny
Mark Costello wrote:When are we getting pics
Just got home and need to extract the pics and upload.....give me time
Posted: Mon Feb 28, 2005 4:54 pm
by Tiny
Posted: Mon Feb 28, 2005 6:41 pm
by Tiny
Posted: Mon Feb 28, 2005 6:43 pm
by Tiny
note that these normaly use a u - bracket arrangment but due to GQ with no body lift, we decided to attempt any way and this was the method......very happy, bloody strong to
Posted: Mon Feb 28, 2005 7:13 pm
by Screwy
You wont break those. Not in a long shot
Look very nice.
are they powder coated?
screwy
Posted: Mon Feb 28, 2005 7:22 pm
by Hoonz
eh if u drive anything like i do they'll bend ehehehe
i bent mine .. 3 mounts and 6mm wall 100x50 RHS
Posted: Mon Feb 28, 2005 7:47 pm
by blkmav
They almost look like mine
Re: The sliders are on :)
Posted: Mon Feb 28, 2005 8:01 pm
by Surfection
#Tiny wrote:Cheers Jeremy for a bloody well done job, when I chop the quarters I will come and see for a rear bar, and a cheezy style winch bar when funds allow
Tiny
No worries at all mate. We can build you a winch bar no probs but it won't be a 'Cheezy Style' bar, I know how much it shits Cheezy to have his hard earned style of work copied so as long as you're cool with something unique and different that's fine by me !!
Re: The sliders are on :)
Posted: Mon Feb 28, 2005 8:36 pm
by Screwy
Surfection wrote:#Tiny wrote:Cheers Jeremy for a bloody well done job, when I chop the quarters I will come and see for a rear bar, and a cheezy style winch bar when funds allow
Tiny
No worries at all mate. We can build you a winch bar no probs but it won't be a 'Cheezy Style' bar, I know how much it shits Cheezy to have his hard earned style of work copied so as long as you're cool with something unique and different that's fine by me !!
nice work jeremy
Posted: Mon Feb 28, 2005 8:39 pm
by Chookman
Love the sliders.
Are there any legal problems with welding on to the chasis??
Chook
Posted: Mon Feb 28, 2005 9:02 pm
by Screwy
Chookman wrote:Love the sliders.
Are there any legal problems with welding on to the chasis??
Chook
as long as u weld ontop the outside of the chassis its fine.
its only if u weld to the top or inside do u have problems.
screwy
Posted: Tue Mar 01, 2005 6:51 am
by Tiny
yeah, bit of pipe and somewhere to mount a winch......anything goes as long as its strong.
you want that alloy bar still Screwy???
Posted: Tue Mar 01, 2005 9:23 am
by morkz
you need to make that wagon into a UTE saves money on a rear bar and and rear quarter chop.
all in all looks awesome.
Posted: Tue Mar 01, 2005 9:29 am
by Tiny
morkz wrote:you need to make that wagon into a UTE saves money on a rear bar and and rear quarter chop.
all in all looks awesome.
thanks mate, I intend to, but money is the prob now.......quarter shop will be makeshift anf prolly wont bother with a bar...intend an xxxxtra cab
Posted: Wed Mar 02, 2005 9:39 am
by XXL Maverick
Nice sliders dude, even better pinstripes!!!
Posted: Wed Mar 02, 2005 10:29 am
by morkz
#Tiny wrote:morkz wrote:you need to make that wagon into a UTE saves money on a rear bar and and rear quarter chop.
all in all looks awesome.
thanks mate, I intend to, but money is the prob now.......quarter shop will be makeshift anf prolly wont bother with a bar...intend an xxxxtra cab
yeah nice work exxxtra cab is the way to go.
Posted: Tue Mar 08, 2005 4:42 pm
by Adsman
note that these normaly use a u - bracket arrangment but due to GQ with no body lift, we decided to attempt any way and this was the method......very happy, bloody strong to
What guage steel did you use for the mount plates and box steel to chassis mounts.
Posted: Wed Mar 09, 2005 12:44 am
by Robbo
How do you get em off to repair em when they bend or something, not that they don't look good & strong but that country side your pix taken in! hmmm shit will happen!
Posted: Wed Mar 09, 2005 8:52 am
by Tiny
Adsman wrote:note that these normaly use a u - bracket arrangment but due to GQ with no body lift, we decided to attempt any way and this was the method......very happy, bloody strong to
What guage steel did you use for the mount plates and box steel to chassis mounts.
suggest you
pm surfection for the finer details mate
Posted: Wed Mar 09, 2005 8:55 am
by Tiny
Robbo wrote:How do you get em off to repair em when they bend or something, not that they don't look good & strong but that country side your pix taken in! hmmm shit will happen!
wil think about that when we get there.
........at the moment, I am happy to have something on there as it is near impossible to get anything on with GQs with no body lift
