Page 1 of 1
brakes on bj 40
Posted: Sat Mar 05, 2005 6:16 pm
by forty_forty
just changed the back brake shoes do the springs go behind the cylinders i have them in the front pls i need help not to good at this lol and can any one tell me i have a b motor with after market turbo got ever thing in bits motor was complete but do i need a throtle body im told i dont but how do i get the thing to go with out one hope some one can help me it has a pipe running form inlet to turdo i think i need to cut it and fit the throtle body the turbo hose to the pipe so i can have a accelator pls do help thanks
Posted: Sun Mar 06, 2005 11:04 am
by scotto
Take hub etc off so you have plenty of room..
Put wheel cylinders on first then line up the shoe plates, adjusting sprocket thingo and then lateral retaining springs.
Theres 2 springs on slotted washers you push in and turn with pliers to keep the shoe plates in place, they are at "3 oclock and 9 oclock" when you are looking at the assembly.
The springs and plates sit under the wheel cylinders not quite sure what you mean by 'behind' them...they need to go on before the hub hoes back on..
Turbo, I wish i knew...not much help there...you could try bj42turbo (Daz) for advice on how it is set up....
Are you a Melbourne feller?
Posted: Sun Mar 06, 2005 1:34 pm
by forty_forty
thanks for that i have the springs on the out side have to change them yes i am from melb im in altona where r u from im just trying to put this bj together got it in bits
Posted: Sun Mar 06, 2005 1:41 pm
by forty_forty
buy the way r u the scott that put me on to this site i spoke to a scott on the phone about a stater i had and how do i find dazza pls thanks trev
Posted: Sun Mar 06, 2005 3:10 pm
by scotto
forty_forty wrote:buy the way r u the scott that put me on to this site i spoke to a scott on the phone about a stater i had and how do i find dazza pls thanks trev
let's not talk about starter motors should have called you back...
yes it is excellent deduction watson
Dazz is
bj42turbo you can find him in his members area - ask him there, sound bloke, and will tell you all about 3Bs and turbos till the cows come home.
http://www.outerlimits4x4.com/PHP_Modul ... 2&start=90
OR if you hit the PM button at the bottom left corner of a post it will send the owner of the post a 'private message' like an email..don't know if you worked that one out but there's $0.02 for you.
keep asking the questions someone will have the answers!
Posted: Sun Mar 06, 2005 3:12 pm
by scotto
and with a bit of notice am sure i could give a hand with a thing or two you might be stumped on..i had mine it bits once
Posted: Sun Mar 06, 2005 3:19 pm
by forty_forty
ok thanks scott ill try the members list thanks again