ball joint
Posted: Sun Mar 06, 2005 10:52 am
dose anyone know how to change a ball joint in a xj the easiest way
any help please
any help please
Page 1 of 1
Posted: Sun Mar 06, 2005 10:20 pm
Which ball joint
Posted: Mon Mar 07, 2005 1:01 pm
all four frount diff upper and lower
Posted: Thu Mar 17, 2005 6:33 pm
with a hammer 
ball joints
Posted: Thu Mar 17, 2005 8:44 pm
i have found the easiest way to change ball joints is to take the car to a professional and pay them to do it
Posted: Sat Mar 19, 2005 9:16 am
Hi Ratboy
This job is not an easy one to be done at home you need to have access to the right pressing tools or the job will cost you heaps.
The best bet is to head to your local Jeep mech and get them to do it,
they should have all the right gear and the job would be done in half the time.
Jamie
This job is not an easy one to be done at home you need to have access to the right pressing tools or the job will cost you heaps.
The best bet is to head to your local Jeep mech and get them to do it,
they should have all the right gear and the job would be done in half the time.
Jamie
Posted: Wed Mar 30, 2005 3:01 pm
Do you guys have a place to buy tools at a low price? Here in Anchorage,Alaska the kit would run about $280 & you could rent it for $20 a day U.S.
Posted: Wed Apr 06, 2005 7:19 pm
if you bring the car to me i'll fit them of a carton of BUNDY OP'S, and will take about 2.5 hours to do..
Posted: Wed Apr 06, 2005 8:09 pm
skippy's GQ wrote:if you bring the car to me i'll fit them of a carton of BUNDY OP'S, and will take about 2.5 hours to do..
Ill come round and watch and help you drink em OPs
