Outer Limits 4x4 Board

Now I've got your attention....

Are you supposed to keep filling the grease nipple on the steering, suspension, and uni joints in the tailshaft until it flows out?

AND.... has anyone managed to find a grease gun attachment that will fit on the front diff prop shaft uni's?

Dave, when i did mine i ended up taking it up to the mechanic's and he greased the prop shafts for me. He had a gun that had a flexible hose on it and it reached in there fine. Pretty sure you are spose to fill them till the grease comes out, especially if you've never done them before and you want to make sure that you know what grease is in there. Some people dont like mixing their greases up.

murcod wrote:AND.... has anyone managed to find a grease gun attachment that will fit on the front diff prop shaft uni's?

you get a needle attachment - allows access to tighter areas. thanks to roothie on that one - see the tassy vid i think

Heath, is that some dodgey home made thing- or can you get something off the shelf?

Are you supposed to keep going until the old grease is flushed out then Lowndsie???

Something like on this page Heath???

http://www.macnaught.com.au/lub/Accesso ... plers.html

yeah dave i'm sure i heard somewhere to make sure you flush the old grease out.

Might wait until after I get the lifted springs in and have another go then.