Outer Limits 4x4 Board

cause i just brought a roll bar from an mq and it bolts onto the wheel arch
and in the mk the back seat covers the wheel arch so im thinking i need the put the mq back seat in thanks for your help

i heard u brought the roll bar off this top bloke!

Not all Mk's had the rear seat that goes across the arches... they all bolt up the same on floor pan, just the wide rear seat needs brackets on the side to hold seat where the seat between the arches fits and sits up with no further brackets etc....

I got so much bracing on my roll bar that I can't have any back seats because I don't like opening rear window to let people get into rear seat.

Even if your patrol didn't come with back seat it would have holes there they just have a bung in em. Nissan built the bodies the same but for things like rear seat or wheel carrier they had dents where holes should go it was jsut a case of options and extras...

Mk

thanks Patroldude for all your help all i need to do now
is hope that the bloke i brought the roll bar off will do me
a good price on the rear seat hint hint

ash wrote:thanks Patroldude for all your help all i need to do now is hope that the bloke i brought the roll bar off will do me good on the rear seat hint hint

WTF!

ash wrote:cause i just brought a roll bar from an mq and it bolts onto the wheel arch
and in the mk the back seat covers the wheel arch so im thinking i need the put the mq back seat in thanks for your help

MQ seats will bolt straight in to the back of MK...

But regardles of 5 seat or 4 seat, the floor brackets themselves are different.
there are 2 different sets of brackets...

i know this cause i tried to put a MK 3 seater rear in my MQ 2 seater and had to change the brackets as well......

the brackets bolt in the same places, just have different seat mounts on top so its just abit of extra work to change the brackets ova too.
u will need to ppl as the bolts for the seat brackets have nuts on other side than spin

screwy