Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

OziExplorer

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

OziExplorer

Post by Pinball »

Anyone installed this software onto a CE platform?

Am trying to install the CEPocketPc version and does not seem to complete the install.

Shows error of missing file or components, and on reboot no trace of installation.

Ideas??

Spock
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

there are 3 versions for pocket pcs, make sure you have the right one
www.overkill4x4.com
ph 94766137
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

spazbot wrote:there are 3 versions for pocket pcs, make sure you have the right one


Check this, and what version? i have ver 1.11.2 and run it with no problems.
Top
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

Post by Pinball »

got it working on demo mode....

thanx for the feedback

FYI unit i'm usin is a MIG728

http://www.woodhead.com/products/mobilecomputing/#4288

even got it to talk to the internal gps...

now i just gotta get some maps to test it on locally... anyone got some electronic mapsets of SE Qld i could examine?

Spock
Top
Posts: 2
Joined: Sun Oct 17, 2004 8:59 pm
Location: Brisbane (Northside)

MIG728 Up and running...

Post by az_oz »

It's been a while, but we've got the MIG installed. Other than some mouting issues (these things arent exactly small and light weight compared to other units), it works like a charm.

There's a run down on the install here.
Top
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Post by Nev62 »

I've got it working with my navman sleeve on my PDA
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 81
Joined: Sat Jun 03, 2006 8:59 pm
Location: newcastle

Post by dmcruising »

Pinball wrote:got it working on demo mode....

thanx for the feedback

FYI unit i'm usin is a MIG728

http://www.woodhead.com/products/mobilecomputing/#4288

even got it to talk to the internal gps...

now i just gotta get some maps to test it on locally... anyone got some electronic mapsets of SE Qld i could examine?

Spock
for maps try http://www.gpsaustralia.net/ thereis all of nsw but you may find info for qld check the forums
Top
Posts: 795
Joined: Mon Nov 04, 2002 10:15 pm
Location: Sydney NSW

Contact:
Contact taziiy

Post by taziiy »

http://www.gpsaustralia.net/forums/forumdisplay.php?f=8

there is the link to the qld area for map d/l you need winrar to unzip the maps
95 hilux d/c locked & lifted, [url=http://downunder4x4.net/forum/index.php?referrerid=18]Downunder4x4[/url]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 122 guests