Page 1 of 1
Bent upper arm on diff
Posted: Fri Mar 11, 2005 8:20 pm
by CB0569
On my 89 mav lwb dual fuel, i noticed that the upper arm going to the rear diff on the rhs is bent.It has hit the petrol tank when on extension.
When i put in the 6"lift its going to be a problem.
ANY SUGGESTIONS on how to fix this other than removing the petrol tank?
Re: Bent upper arm on diff
Posted: Fri Mar 11, 2005 8:26 pm
by MKPatrolGuy
CB0569 wrote:On my 89 mav lwb dual fuel, i noticed that the upper arm going to the rear diff on the rhs is bent.It has hit the petrol tank when on extension.
When i put in the 6"lift its going to be a problem.
ANY SUGGESTIONS on how to fix this other than removing the petrol tank?
Get the petrol tank modified. Get it notched where the arm swings so it has clearance at full droop.
Posted: Fri Mar 11, 2005 10:07 pm
by CRUSHU
i have a custom, stronger, curved arm installed. it is bent so it clears the tank, even at full droop.
procomp in melbourne make them. 03 9705 6677
tank
Posted: Sat Mar 12, 2005 6:06 am
by china
take to it wif a big hammer..
