Outer Limits 4x4 Board

Couple of probs with Man. Box, hoping for help,

1. When selecting reverse with clutch depressed, if car is still rolling forward at all, gearshift goes into R posn' but gears don't mesh and g/box grinds, with clutch still depressed, after car stops rolling I select neutral then reverse, all normal, anytime I select reverse with car stationary....all normal??????????????

2. When changing up through the gears, each time I depress the clutch there is a vibration (momentary) as I select the higher gear.

Thrust Race..........I'm thinking for#2 but #1 Prob not sure where to start, is it linked to #2 Prob?????????????????????

Thanks in advance........I Hope..........Bone!!

88MAV wrote:Couple of probs with Man. Box, hoping for help,

1. When selecting reverse with clutch depressed, if car is still rolling forward at all, gearshift goes into R posn' but gears don't mesh and g/box grinds, with clutch still depressed, after car stops rolling I select neutral then reverse, all normal, anytime I select reverse with car stationary....all normal??????????????

I'm not bloody surprised!!!! you should really stop before selecting reverse!

and yeah, possibly release bearing or worn/crudded up clutch

I wouldnt worry about any of them, by all accounts a lot the gearboxes on these have 'characteristics' (minor irritations!) I know mine does!

put a clutch kit on it
hopefully ya have damaged ya cyncroves