Page 1 of 1
Sierra / Vitara Lift
Posted: Thu Mar 31, 2005 8:34 pm
by Try_Me
Hey people
Just wanted to know which would be harder to lift either the sierra / vitara and what is need to put on 31's or 32's
Also if anyone can give me a few tips on were to look for rust etc on them so i can keep and eye out when i go to buy one
Thanks Nick
Posted: Thu Mar 31, 2005 8:48 pm
by mud4b
sierra is way easier to lift for those sized tyres...
Posted: Thu Mar 31, 2005 9:05 pm
by Try_Me
do you no how much ruffly it would cost to raise and all not spending to much
Posted: Thu Mar 31, 2005 10:27 pm
by roadrunner
Have a bit of a read through this zook section, its been discussed once or twice before
oh yeah, welcome to the board
Posted: Thu Mar 31, 2005 11:16 pm
by Da Zook
to do a sierra u can fit motorway muds "same diameter as 31" BFG MT/R" u can do a 2 inch body lift and 2 inch extended shackles.... thats about $400 unless u are good at fabbing.... bit of trimming and shes apples
Posted: Fri Apr 01, 2005 12:51 pm
by Gibbon TSAM
i got 31 claws with only a 2 inch body lift.
for the lift cost me $200 for a kit.
if i sourced the ally blocks and high tensile bolts myself could have got away with it for about $100 just to lazy though
Posted: Fri Apr 01, 2005 1:02 pm
by Spike_Sierra
i did my body lift for $48 and was enough to fit 31's.