Page 1 of 1
4Runner springs.....??
Posted: Fri Apr 01, 2005 1:56 am
by crankycruiser
Just wondering if 80 series rear coils (std) will fit in the bac of a v6 4runner???
If so how much lift will it give it??
Thanks fellas
Posted: Fri Apr 01, 2005 8:38 am
by DAWSO 4x4
i put a set in my 90 SR5 2.8D and i think it gave me about 4" of lift i hope this helps you
Posted: Fri Apr 01, 2005 9:54 am
by crankycruiser
Was it sagged b4 it lifted it 4"??
Did it sit ok once u wound up the torsion bars??
Posted: Fri Apr 01, 2005 5:57 pm
by 4sum4
we put standard 80s coils in Dawso truck and got 4" of lift over stock and also put rancho 912`s ,But then you get problems like rear steer and the upper links foul the fuel tank, so theres a bit more than just adding the coils.Pic of the rear steer
Posted: Fri Apr 01, 2005 10:20 pm
by crankycruiser
Well we did it today...
only gave it bout 2.5" above std...
Posted: Sat Apr 02, 2005 1:32 am
by DAWSO 4x4
i think you could of put the sagged springs in your self by the looks of that photo ,it's a bit of a trick when you put 80 series coils in bundera,4 runner and hilux conversion to get 4" of lift .
you wouldn't have 2" of lift before you put the 80 series coils in
Posted: Sat Apr 02, 2005 11:33 am
by crankycruiser
DAWSO 4x4 wrote:i think you could of put the sagged springs in your self by the looks of that photo ,it's a bit of a trick when you put 80 series coils in bundera,4 runner and hilux conversion to get 4" of lift .
you wouldn't have 2" of lift before you put the 80 series coils in
Not sure what u mean???
It lifted it 4" from what it was.. but it was sagged heaps to start off with..