Page 1 of 1
what ratios are standard??
Posted: Sat Apr 02, 2005 6:32 pm
by mickyd555
where the diff ratios different in a 75 series ute from a 2H moter to the 1HZ. im asking for a friend who has changed the engine from a 2H to a 1HZ and now says the ratios feel wrong??? its a 1987 model if that makes it clearer. i know nothing about toyotas cause i drive a decent truck.....
Posted: Sun Apr 03, 2005 2:57 pm
by mickyd555
somebody must know????
Re: what ratios are standard??
Posted: Sun Apr 03, 2005 9:24 pm
by RV80
Re: what ratios are standard??
Posted: Mon Apr 04, 2005 12:56 pm
by roberts
Posted: Mon Apr 04, 2005 3:50 pm
by kroozer91
Posted: Mon Apr 04, 2005 4:04 pm
by bad_religion_au
4.11 for the 2h and 4.1 for the 1hz i think
Posted: Mon Apr 04, 2005 4:06 pm
by dumbdunce
bad_religion_au wrote:4.11 for the 2h and 4.1 for the 1hz i think
correct.
Posted: Mon Apr 04, 2005 4:16 pm
by Hybrid
must be that .01 thats making all the difference......
Posted: Mon Apr 04, 2005 8:22 pm
by mickyd555
thanks for the flaming, and thanks to those who gave me answers too........i dunno what hes on about now......i think i might tell him to just put a turbo on it. what other options does he have. he just reckons its too slow.......
i told him to get a patrol, but he wont listen.....
Posted: Tue Apr 05, 2005 9:22 am
by carts
He probably just thought that he would be getting an amazing boost in performance going from the 2h to the 1hz and now is disappointed. He should be getting more speed out of each gear though as the 1hz has more of a rev range than the old 2h.
Posted: Tue Apr 05, 2005 9:32 am
by dumbdunce
carts wrote:He probably just thought that he would be getting an amazing boost in performance going from the 2h to the 1hz and now is disappointed. He should be getting more speed out of each gear though as the 1hz has more of a rev range than the old 2h.
not to mention a stack more torque at any given point through the rev range - if the 1HZ is not significantly outperforming the 2H there is something gay going on.
Posted: Tue Apr 05, 2005 10:06 pm
by mickyd555
i drove it today, i thought it was ok.........i think he wants a sports car.
i said supercharge
Posted: Tue Apr 05, 2005 11:56 pm
by bad_religion_au
turbo 1hz is the way to go...
Posted: Wed Apr 06, 2005 7:06 pm
by skootin
They are all 4.11:1.
4.1 is only in the 80ser
Gearbox ratio's are all the same as well.
It's probably cause the 1Hz will actually rev harder than the 2H.