Outer Limits 4x4 Board

Posted: **Sat Apr 02, 2005 8:43 pm**

been reading a few posts here with guys upgrading their headlight wiring loom and running stronger globes..

question for you guys is, can I apply this ARB wiring loom to my 24V system and lower the fuse level to 10A? would I need to change the relays?

just looking at the narva website, they have a 24V 130/90W H4 which would be nice for me..

I just get the feeling that if I apply this ARB wiring loom, something may melt

Posted: **Sat Apr 02, 2005 8:51 pm**

P=VA

Work out the gauge of the wire and the max current it can handle.

Posted: **Sat Apr 02, 2005 8:51 pm**

If you change the relays for 24v ones you sould be OK. When you double the voltage you 1/2 the amps, that means the cable used is good for 200watt lights at 24v's.

Posted: **Sun Apr 03, 2005 12:15 pm**

blkmav wrote:P=VA

Work out the gauge of the wire and the max current it can handle.

does anyone know the specs on the cable ARB use in the loom?

Posted: **Sun Apr 03, 2005 3:38 pm**

It will be OK for your application. Will work even better than on a 12v vehicle. Change relays for 24v type is all.

Bazzle

Posted: **Sun Apr 03, 2005 4:47 pm**

thanks bazzle

Outer Limits 4x4 Board

gq headlight upgrade for 24V safari?

gq headlight upgrade for 24V safari?