Outer Limits 4x4 Board

After purchasing some axles last week & looking at a couple of other mq/mk's i though shit mine must be tall!
We decided we would measure from the ground to the top of the grill / below bonnet line

So i went home & measured & Mine measured 122cm
EDIT: Thats With 3" body 2" springs & 36'swhats everyone's else's??


The other two measured:
Scrapper's : 97cm & 102cm



Poser Shots:

i measured mine up its 121cm
okay mods
sd33 diesel
2 inch springs
2 inch extended shackles
2 inch body
and 33s



btw nice pic mark

Mine messured in at 125cm. You also should put a list of mode in so you can compare with trucks simular to yours.

Mine- Sping over
35" claws
2" springs
L28 motor

Ill measure mine when the new springs go in, cause the current fronts are shagged and 'W' shaped

nice pic mark

Screwy_ScrewBall wrote:Ill measure mine when the new springs go in, cause the current fronts are shagged and 'W' shaped

nice pic mark

just measure it already.............

Mine messured in at 122 cm, with front springs shagged, SOA and 36" tyres.

137.5cm

SOA'd, on 35" BFG's...... with excelent spring paks

Really the Question should be how much clearance from the chassis to the ground !!!!

I measured mine at 62cm from the gearbox mount area on the bottom edge of the chassis to the ground.

66cm with the 38.5" Swampers on

praise the lifted and pass me another height/dizzy pill


just as well I dont drink ....I'd hate to fall out of mine pi$$ed

i thought more people would be posting up heights

I would I just keep forgetting to measure it.

Standard sagged springs - I will measure the other one as well that I am picking up later this week (hopefully).

Ah - I will have to measure mine when the SOA is done - got whole truck with ORI SOA done to it with V8 conversion and few other choice bits for $1,000. took us 3 hours to strip it completely down to nothing (love it when no bolts are seized) Guy I got it off recons it had 2 inch lifted packs but he took out heaps of springs - just hope I don't end up like screwy with springs that look like and ocean view they got that many waves in em! I have to fix up my front shackles too - idiot before me moved em back but did a really bad job of it!! Oh n he welded the bull bar to the chassis rails too - arse clown!

All these rigs I must admit look so damn nice - I recon a big congratulations to all those who posted pics etc - looks great peoples - give me in spiration galore....

Mk

106CM

Its as I brought it so dunno whats been done except for whats been replaced when I've broken it

Lower than 106 normally as the bullbar and guard are off they got bent when I was playing

Paul

130mm

2" body, 2" springs + SPOA, 35" pro-comps, STD shackles.
Before and after

after seeing kingys, marks and urs Peter, gotta measure mine, will put the new front end springs together this weekend hopefully and will measure then.... wanna see how they compare

Got my new springs today and sitting at ride hieght.

She measures in at 128cm

Thats:

- 38" super swampers
- Spring over axle
- V8
- reverse shackle front end, dropped crossmember
- 2 inch extended shackles
- 1 inch body lift ( only to clear the zorst )


screwy

Probably shouldnt admit this but mines 100 exact

Mine's sitting at 105cm.

Its got Ironman springs, 2" Extended Superior shackles, and 31" BF All Terrains.

Coxy

I made a mistake......

Now that ive got the new bushes all in and the tyres pumped up she is sitting at

131cms to the bottom of the bonnet

all mods as above

No idea,

Screwy do you remember before you stripped it?

2" suspension
2" body
2" shackle
35's... it must add up to something

Ok I thought I'd better measure mine too

It measured 110cms

- 2" Body Blocks
- 2" Suspension (Tired)
33" BFG MTR's
SD33T + Lots of lights

I want ext shackles.. can anyone help??

Mine is about 38 inches with 31 10.5 tires. new springs but figure something, wrong with springs as other mks sit couple inches higher. Friends 91 gq ute measures about 43 inces with no modification, except 285 75 16s. Figure that gqs and mqs sit at same height. (Actually Mq height specs are slightly more, although any that are still standard would have sagged long ago and have new lift springs).

Mine is

2in body lift
2in springs
31x10.5
113cm

Should be interesting tomorrow when the 35's go on.

Casey

Howdy

Mine is now 119 and a bit on 35's
Heres a pic

Casey

How are you going for clearance there kc_ksom? Have you taken it out for a run yet? Just curious, I'm still toying with tyre choice.

Coxy

yea Coxy

There pretty close, the tyre does hit the spring on absolute full lock, and there isnt that much clearance in the gaurds as yet as I still have to cut the gaurds.
But as a tyre the Baja claw radial is pretty awesome, I havnt noticed any difference in noise etc, I think its even lighter in the steering than with the 31's on it, thats no joke.

The tyres do vibrate at around 5km, wich feels pretty different, like the tail shaft is out of round, lol...

I just hope the coppers stay away.

Casey

MQ080 wrote:No idea,

Screwy do you remember before you stripped it?

2" suspension
2" body
2" shackle
35's... it must add up to something

Id be guessing about 115cm approx