Outer Limits 4x4 Board

Posted: **Sun Apr 03, 2005 7:35 pm**

not worn please get back to us thanks[/img]

Posted: **Sun Apr 03, 2005 9:05 pm**

you wanna tailshaft for a twenty YO car "not worn"
I dont understand!!!!!!!!!!

Posted: **Sun Apr 03, 2005 10:42 pm**

Front or rear?

Diesel or petrol?

all are different.

I have a front from a deisel and a custom SOA rear from diesel if that helps.....

screwy

Posted: **Sun Apr 03, 2005 11:02 pm**

auto and manual are different also I think?

Posted: **Mon Apr 04, 2005 5:55 am**

yep they are, but autos are rediculously uncommon and the only ones ive seen have been in wagons not SWBs so i figure its a manuel.....

4 speed or 5 speed????

Posted: **Mon Apr 04, 2005 5:35 pm**

sorry guys its a 5 speed manul and after a front one thank

Posted: **Mon Apr 04, 2005 7:16 pm**

bugga, cant help ya man...only have a 4 speed desiel front shaft.

dude is it diesel or petrol?

they are different again.

screwy

Posted: **Mon Apr 04, 2005 11:32 pm**

I got one from an sd33t with the double cardan joint and all.....

spline does have a little bit of play in it but uni's and cardan joint are fine.

make me an offer

Located melbourne

Posted: **Tue Apr 05, 2005 8:00 am**

Have one that is out of a LWB that was upto a 4spd behind an L28.

If you don't take the one above then pm me to work something out.
As jtraf got in first.

Mere

Posted: **Tue Apr 05, 2005 8:08 am**

I would be interested in one with a double cardan joint if someone has one and the original poster doesn't want it.

Need a double cardan for my jeep, so as long as the joint is good the rest will be cut off and retubed with 1310 unis and yokes.

cheers

z

Outer Limits 4x4 Board

please any boby who has tail shaft

please any boby who has tail shaft