Outer Limits 4x4 Board

I am about to lift a 96 coil sprung sierra and would like to know if anyone has lifted one , What coils did u use ?. Am prepared to make anything fit, but would still like a reasonable ride.
Have just completed a 3" body lift but still need more height for 31" centpedes.[img]

howdy

i had 3 inch suspention lift in mine

uses ranchos in the rear and trailwin struts in the front

custom made coils allround by all springs in morebank

i also have 3 inch body lift and could run 33's with a little massaging

pm HR zook he may be able to sell you a 3 inch suspention lift kit or and 2 inch suspention lift kit

RB

btw i have some straight control arms

and they have good bushes in them you may require these

you could also measure up and get a rancho for the front

would need somone to weld a coil seat on there and also may need the towers modified to clear the shock body

i believe sam at overkill can do this

How much would i expect 2 pay for lift?
And how do i pm HR Zook ?

i think i payed 1600 for my lift kit ages ago

highly overpriced thou there wasnt anything else really

ill let him know your lookin for lift

Thanks

I have also played with the dash.
Didnt need those vents anyway

Nice rig.

your other toy is exactly the same as my rig. same colour even.


cheers

I am slowly stripping out the mode i have done to it and transfering them onto the new one.
Have to fit the stage 3 transfer and front lok yet, Dont know how i will go . I hear that i might have to modify the tailshafts ,.

You have to change over the uni's to the WT type. take the ones off the drover and put the other ones on. too easy.

You got any more pics and writeup of mods to the drover? email me if you want to save this thread hijack

cheers