Reco TB42 head anyone?
Posted: Thu Apr 07, 2005 12:29 am
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 36981&rd=1
Nissan GQ patrol or Maverick 4.2lt cylinder head, EFI or petrol with LPG, fully reco'd app (3 mths ago), gas valve seat inserts, guides, machining etc. This head has also been modified for additional water bleed ports on each cylinder, a MUST as these heads develope "steam pockets" around the chambers, get hot & crack very easily, even worse with LPG, you will see the pipes circled in yellow. An adaptor hose & fittings is included to connect to top rad hose. This head was used for app 3 months before vehicle was rolled & written off, you can see the "overheat plug" on the second pic still intact.
Why pay the going price of $900-1000 for a used second hand head at the wreckers, then have it reconditioned and cost you a bundle. It's all ready to go here, ready to bolt on. This head is a must for LPG vehicles.
Note: this head will fit both carby & EFI engines alike.
Will ship interstate BUT BUYER to arrange courier & pay costs, or can p/u Melb. Any further queries you can ring me on 0422309006.
Nissan GQ patrol or Maverick 4.2lt cylinder head, EFI or petrol with LPG, fully reco'd app (3 mths ago), gas valve seat inserts, guides, machining etc. This head has also been modified for additional water bleed ports on each cylinder, a MUST as these heads develope "steam pockets" around the chambers, get hot & crack very easily, even worse with LPG, you will see the pipes circled in yellow. An adaptor hose & fittings is included to connect to top rad hose. This head was used for app 3 months before vehicle was rolled & written off, you can see the "overheat plug" on the second pic still intact.
Why pay the going price of $900-1000 for a used second hand head at the wreckers, then have it reconditioned and cost you a bundle. It's all ready to go here, ready to bolt on. This head is a must for LPG vehicles.
Note: this head will fit both carby & EFI engines alike.
Will ship interstate BUT BUYER to arrange courier & pay costs, or can p/u Melb. Any further queries you can ring me on 0422309006.