Page 1 of 1
Landcruiser / Hilux diff flange question
Posted: Fri Apr 08, 2005 5:06 pm
by turbo4t
Does anyone know if there is such thing as a Hilux pinion flange with the same course spline as the pre '79 Landcruisers.
Posted: Fri Apr 08, 2005 6:56 pm
by dumbdunce
I don't think there is. wha have you got in mind?
Posted: Fri Apr 08, 2005 9:57 pm
by rock hopper
i sell a multi fit flanges for l/cruisers
finespline and course spline .
$45-00 ea ......
12 holes in each . takes 3 types of tailshaft paterns ...
3 speed 4 / 5 speed late 5 speed
Posted: Sun Apr 10, 2005 8:24 pm
by turbo4t
rock hopper wrote:i sell a multi fit flanges for l/cruisers
finespline and course spline .
$45-00 ea ......
12 holes in each . takes 3 types of tailshaft paterns ...
3 speed 4 / 5 speed late 5 speed
Will it fit a Hilux shaft though?
Posted: Sun Apr 10, 2005 8:29 pm
by turbo4t
dumbdunce wrote:I don't think there is. wha have you got in mind?
Just found one. Very early Hilux use them. Just trying to use an early coarse spline centre with a locker into the front of my cruiser in which I'm running a hilux shaft for extra slip. Too lazy to pull the locker out and fit it into a fine spline centre. The old coarse pinion should hold up ok in the front.