Page 1 of 1
Anti-wrap bar
Posted: Sun Apr 10, 2005 5:25 pm
by jasonmcc
Hi guys could anyone please email me some pics of a Anti-wrap bar (Trac bar) etc for a sierra. Just need some ideas. What bushes did you use or did you use Rod ends
jason@totalavionics.com.au
Cheers
Jason
Posted: Sun Apr 10, 2005 7:32 pm
by Gwagensteve
This is difficult to do without knowing your set up. If I were you , I would sketch the position of everything you now have and mock some ideas up on the sketchpad. I am working with an engineer atm who was very insistant that no distortion of the springs would be allowed due to the traction bar, and instructed us the sketch it all up.
We have worked out what we need for our application, but the plan is to use a cable rather than a bar as there is no way to make a bar move in exactly the right plane without influencing the springs and have an effective bar. I don't think our result will be perfect, but it will be better than nothing. This is for a SPUA set up. I assume you are SPOA??