Page 1 of 1

tyre size.... measured and sidewall

Posted: Sun Apr 17, 2005 3:36 pm
by -Mick-
I reckon it'd be a good idea to post a list of tyre sizes, comparing what they actually measure to what they're meant to be. Some of the variations are just stoopid and its good info if you're looking to buy :cool: I need to go larger now to save my gearing :roll:

Best idea is to use a template... just cut and paste it for each tyre type :D I'll start......... maybe this could get stickified :?:

BRAND : Pro Comp

MODEL : X-Terrain

STATED SIZE : 31"

MEASURED SIZE : 30"

RIM WIDTH : 7"

PSI : 32

good ideas slunnie :lol:

Posted: Sun Apr 17, 2005 3:40 pm
by mickyd555
last time i was looking for tyres, they had a chart that gave actual measured size of the tyre im mm, that way you can see the difference in size by mm. very acurate, but i dont knwo when they measure it, ie, on rim or off........


just an idea

Posted: Sun Apr 17, 2005 6:24 pm
by Thor
also say whether they are on/off rim.etc :?:

Posted: Sun Apr 17, 2005 6:41 pm
by Slunnie
measuring rim would also be good to gauge width and also measured pressure which all make a difference.

BRAND : Simex

MODEL : JT2

STATED SIZE : 34x11.5-16

MEASURED SIZE : 35.2 x 11.8

RIM: 8"

PSI: 36

Posted: Sun Apr 17, 2005 7:11 pm
by landy_man
and what about whether it is on the vehicle or not...
and perhaps on what vehicle...

Posted: Sun Apr 17, 2005 7:13 pm
by Slunnie
I thought tyres sizes were measured off the vehicle.

Posted: Tue Apr 19, 2005 9:23 pm
by msh
I made up a list a while back for that exact reason, got about 15 different companies, only did 31's 32's and 33's. I dont know how to post it so it is readable though, i did it in excel, if youv'e got any ideas let me know and I'll try to put her up. I only used the companies claimed overall diameter though.

Posted: Tue Apr 19, 2005 9:27 pm
by -Mick-
msh wrote:I made up a list a while back for that exact reason, got about 15 different companies, only did 31's 32's and 33's. I dont know how to post it so it is readable though, i did it in excel, if youv'e got any ideas let me know and I'll try to put her up. I only used the companies claimed overall diameter though.


send it to me :idea: email button at bottom of my sig :)

Posted: Tue Apr 19, 2005 9:54 pm
by -Mick-
thanks to msh for this info :D

Image

Posted: Tue Apr 19, 2005 9:56 pm
by M1S3RY
Measured off car, going by results, looks like most 31s are measured to 30 inches..

BRAND : Bridgestone

MODEL : Desert Dueller (604V)

STATED SIZE : 31x10.5r15

MEASURED SIZE : 30 x 10.5

RIM: 7"

PSI: 40

Posted: Tue Apr 19, 2005 10:14 pm
by msh
I think most makers measure diagonally or horizontally, that way they can say measured on vehicle is same as off.

Posted: Tue Apr 19, 2005 11:08 pm
by Zute
Just a thought, eg, if a 31" is measured at about 30" and it seams that most are. Than maybe they ( the manufactorer) may mean 31" is the size the tyre will expand to at speed... That would give you a max clearance.
As I said, just my own thoughts, but it would explain the differance.

Posted: Tue Apr 19, 2005 11:28 pm
by ISUZUROVER
BRAND : Goodyear

MODEL : MTR

STATED SIZE : 285/75-16

MEASURED SIZE : 33.2"

RIM WIDTH : 7"

PSI : 35