I picked up the J10 that was on ebay with the holden 253 and jeep running gear, and so far it has ran great with one exception.
the original jeep 4spd manual, has a retainer cap that goes over the ear stick and locks onto two prongs in the ring at the top of the gearbox. The original one broke on me after a few days of driving and the shifter came out of the box. no big deal i just drove home in reverse and shifted it out of reverse in the daylight. i ordered a new cap, spring and boot kit from jeeepart up north. one week later the new cap broke the same as the old one. is this a commomn problem with this gearbox? if so what the hell can i do to fix it. i have never had this problem with any of the three speeds but they are a different kettle of fish. any advice would be appreciated.
thanks guys .
74cj6
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
jeep 4spd retainer cap
Moderator: GUtripper
jeep 4spd retainer cap
If you come home from a day wheelin and nothing is broken then you wussed out all day!
Who is online
Users browsing this forum: No registered users and 2 guests