Page 1 of 1

MQ SWB 4 speed gearbox/transfer oil change

Posted: Tue Apr 19, 2005 9:24 am
by wannaberacer
I have searched the bible and other posts but can't find an answer to my query.

I want to drain the oil from the gearbox and transfer case (MQ SWB L28) and fill it up again. Sounds easy....and probably is once I identify the entry and exit points.

When I look at the gearbox and transfer case I see about 3 of those square ended sockets that look like I can drain the oil from them. Which one do I use?

Which access point do I use to fill it up again and how much oil do I need for the 2?

Thanks in advance

Posted: Tue Apr 19, 2005 8:11 pm
by rhymus
Quickest & easiest, find the lowest plug in both the gearbox & transfer, remove it to drain oil refill to level with bottom of fill plug. Transfer drain plug is located on drivers side of case on T130A & fill plug is on passengers side. Both drain & fill are on passengers side on T100L. Refill capacity for T130A is 1.8L and for T100L 1.4L . Gearbox is as follows, F4W81A, both filler & drain are on drivers side, drain is obviously lower of two, Refill capacity is 2.7L. Hope this info helps and I hope your girlfriend likes the smell of gear oil.

Posted: Wed Apr 20, 2005 7:38 am
by MKPatrolGuy
One thing to do though is remove the filler plugs first. Nothing worse than draining the oil and then finding out the fille plug is siezed and you can't refill the case.

Posted: Wed Apr 20, 2005 8:10 am
by wannaberacer
rhymus wrote:Quickest & easiest, find the lowest plug in both the gearbox & transfer, remove it to drain oil refill to level with bottom of fill plug. Transfer drain plug is located on drivers side of case on T130A & fill plug is on passengers side. Both drain & fill are on passengers side on T100L. Refill capacity for T130A is 1.8L and for T100L 1.4L . Gearbox is as follows, F4W81A, both filler & drain are on drivers side, drain is obviously lower of two, Refill capacity is 2.7L. Hope this info helps and I hope your girlfriend likes the smell of gear oil.


So are you saying that the gearbox and transfer have separate drain and fill holes for both? As in they run the oil separate from each other?

Posted: Wed Apr 20, 2005 1:43 pm
by MKPatrolGuy
wannaberacer wrote:
rhymus wrote:Quickest & easiest, find the lowest plug in both the gearbox & transfer, remove it to drain oil refill to level with bottom of fill plug. Transfer drain plug is located on drivers side of case on T130A & fill plug is on passengers side. Both drain & fill are on passengers side on T100L. Refill capacity for T130A is 1.8L and for T100L 1.4L . Gearbox is as follows, F4W81A, both filler & drain are on drivers side, drain is obviously lower of two, Refill capacity is 2.7L. Hope this info helps and I hope your girlfriend likes the smell of gear oil.


So are you saying that the gearbox and transfer have separate drain and fill holes for both? As in they run the oil separate from each other?


Yes

Posted: Wed Apr 20, 2005 1:47 pm
by wannaberacer
OK cheers will check it out