Page 1 of 1
what MC is this ?
Posted: Mon Apr 25, 2005 11:43 am
by Ice
no idea what its off... doesn't look like an 80 series one
has 27mm bore
im trying to sort brakes on a 70 series with later model 75 calipers on it if anyone has any ideas
Posted: Mon Apr 25, 2005 4:02 pm
by thebrunks
Looks like a Toyota surf KZN130 Master cylinder.
Take a pic with the whole master cylinder so we can see the whole lot.
Russ
Posted: Mon Apr 25, 2005 4:33 pm
by Ice
ah that is the whole thing its sitting on a 70 series booster atm
Posted: Tue Apr 26, 2005 9:47 am
by hefty_merv
Looks pretty close to the one I had mine replaced with in my 80... Have to wait till I get home from work to check...
Posted: Mon May 02, 2005 11:03 pm
by roscoFJ73
Its also similar to the 78/79 series except they have a hydraulic line coming out of the top in that hole
Posted: Tue May 03, 2005 4:22 pm
by Ice
whats the 2nd line for ?
Posted: Tue May 03, 2005 4:34 pm
by Sixty
Umm, one line is for the front brakes and the second for the rear brakes
Posted: Tue May 03, 2005 5:25 pm
by dow50r
Hi
The top reservoir is generic of 1990-1995 models, after 95, the master goes back to 2 studs, if this master is 1 inch, its80 series or v6 4runner/surf....if its smaller, like 7/8, thats 60 series stuff....the 80 series booster will fit where the 60 one goes too.
Andrew