Page 1 of 1
rebuilding warm m8000 low mount
Posted: Tue Apr 26, 2005 1:16 am
by Duff
ive pulled apart the winch and i found that the ring gear for the clutch has sezised and wont free spool. how do i get it out as i put wd40 on it and it wont budge. has any one done one of these and can tell me what to do to rebuild it. as its my first time and its a very old winch
Posted: Tue Apr 26, 2005 2:03 am
by Daisy
Gidday...
rebuild thread of the winch on pirate4x4...
http://www.pirate4x4.com/tech/billavista/8274/
Hope that helps...
TOM
Posted: Tue Apr 26, 2005 2:52 am
by familybus
ive just finished pullin mine apart and cleaning it all up ready to put together! youl find that a lot of bits will be a pain but with WD and patiance itl all come good! once you strip it down youl see its a piece of piss!