Lowered spring mounts for Hilux rear end

[Gribble]

Okies, i just want to know if anyone here has lowered the front spring mount for the REAR springs 2" or more, and if they did, how was it done and do you have any pics?

Im going to run some IFS leaves that are going to be fairly flat, and i need to end up with around 4" of lift over standard in the rear to help match the front. Im not changing anything on the front because its working really well at the moment.

So my idea currently consists of:

2" dropped front hanger,
200mm extended shackle,
lifting blocks (1 or 2" pending on how many leaves are taken out)
Trac bar if lifting blocks are fitted,
And of course, / \ing the shocks.

What do you guys reckon?

(P.S. Dont anyone f*cking dare start about the angle of the shocks. This thread is mostly about lowering the front mounting, got that? )

(p.s.s. i know its another IFS thread, but due to my lacking computer skills i couldn't find any info on this particular conundrum, but if you find a link, thats cool. )

[Aza]

http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=41106&start=0

considering it is on the front page...... all info will most probable be in there and if u want to ask q's about it i would surgesting putting it in there as then it is kind of all in the same place

[Gribble]

http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=41106&start=0

considering it is on the front page...... all info will most probable be in there and if u want to ask q's about it i would surgesting putting it in there as then it is kind of all in the same place

So, did you lower your front mount 2" or more? Have you got some pics of it? Or did you miss the very first sentence?

[Aza]

http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=41106&start=0

considering it is on the front page...... all info will most probable be in there and if u want to ask q's about it i would surgesting putting it in there as then it is kind of all in the same place

So, did you lower your front mount 2" or more? Have you got some pics of it? Or did you miss the very first sentence?

no but if u read the other thread this is also being discussed mate around page 5 i think. and there is no need to move ur mounts

[Gribble]

http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=41106&start=0

considering it is on the front page...... all info will most probable be in there and if u want to ask q's about it i would surgesting putting it in there as then it is kind of all in the same place

So, did you lower your front mount 2" or more? Have you got some pics of it? Or did you miss the very first sentence?

no but if u read the other thread this is also being discussed mate around page 5 i think. and there is no need to move ur mounts

OK.

1. There isn't a page 5, there are only 3 (at the time of typing)
2. Im talking about LOWERING, not moving them forwards or back, i know i dont need to move them forward or back.
3. Im after some pictures of mounts.
4. I need to match the rear end height with the front. This will mean LOWERING the mountings of the spring. Not moving them backwards or forwards. I could make a 300mm shackle like Toyo Truck has, but that to me seems a little cop magnety. Plus the uni angles would be way worse than they already are at the moment.

Im not having a go at you by the way, just pointing out that whilst that thread is helpful to an extent, it doesn't answer my question completely.

[hypo]

dont lower the mounts they will become rock anchors.

just run 2" lift blocks under the springs

[Aza]

http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=41106&start=0

considering it is on the front page...... all info will most probable be in there and if u want to ask q's about it i would surgesting putting it in there as then it is kind of all in the same place

So, did you lower your front mount 2" or more? Have you got some pics of it? Or did you miss the very first sentence?

no but if u read the other thread this is also being discussed mate around page 5 i think. and there is no need to move ur mounts

OK.

1. There isn't a page 5, there are only 3 (at the time of typing)
2. Im talking about LOWERING, not moving them forwards or back, i know i dont need to move them forward or back.
3. Im after some pictures of mounts.
4. I need to match the rear end height with the front. This will mean LOWERING the mountings of the spring. Not moving them backwards or forwards. I could make a 300mm shackle like Toyo Truck has, but that to me seems a little cop magnety. Plus the uni angles would be way worse than they already are at the moment.

Im not having a go at you by the way, just pointing out that whilst that thread is helpful to an extent, it doesn't answer my question completely.

btw lowing the mounts wont really affect the height that much, just the shackle angle. ur best bet to get 4" lift out of ifs is just 2" spring blocks and run a track bar

[Gribble]

I think i see where your coming from when u say lowering. I think your talking about moving diagonally downwards on the chassis, yeh?

I mean actually hacking off the mount completely, And fitting a dropped 2" hanger, from snake racing for example, so that the pin would sit directly below where it did in its factory location.

Therefore any effect it has on the shackle angle will be very marginal.

Get what i mean now?

[Aza]

to get 2" lift out of that u would have to lower the rear one 2" as well. and yes i understood the first time

i have 2" lift in the back with just stand ifs, if i put in a 2" lift block, i would have 4" lift. i believe that would be alot easier than making new mounts. just my opinion, mayb someone on here has done it and will be able to post some pics up for u

[Gribble]

to get 2" lift out of that u would have to lower the rear one 2" as well. and yes i understood the first time

i have 2" lift in the back with just stand ifs, if i put in a 2" lift block, i would have 4" lift. i believe that would be alot easier than making new mounts. just my opinion, mayb someone on here has done it and will be able to post some pics up for u

Im gonna be running a longer shackle, longer than what ive already got. 200mm to be precise. So that would give 2" of lift at the back eye? so roughly 1" at the diff. So if i lower the front shackle 2" then it will be a true 2" lift. Geddit? Then with the lift block it would be 4".

What ive got at the moment is a 2" spring and 2" longer than standard shackles. But this only gives a 3" lift because the front mount is still standard. Up front ive got a 2" spring and 2" extended shackle as well. But because ive got 2" dropped front hangers it makes it a true 4" lift because the whole spring has been lowered, not just the back by 2".

So, does installing a 200mm shackle on the angle that an ifs spring would put it at give 1" or 2" at the diff? If i leave the spring standard of course.

[My Lil Lux]

I was going to do this also gribble, but going to lengthen the shackle mount first as when I was running lift blocks I found it affects rear tail shaft angle real quick, so am thinking by just dropping the shackle end it will allow me to keep a decent angle on the uni, although I realise this will be at the expense of the springs, If you drop the front down I was thinking of cutting of old hangers, making new plates welded on chassis and have these running in line with lower chassis rail to prevent them becoming rock anchors, then make new holes and run new bolts instead of the Toyo bolts, have seen this done on a rocky running lux springs and it worked well.

(Sorry my mental picture is crap, and so is my drawing but it might explain what I'm rambling about.)

[Gribble]

I was going to do this also gribble, but going to lengthen the shackle mount first as when I was running lift blocks I found it affects rear tail shaft angle real quick, so am thinking by just dropping the shackle end it will allow me to keep a decent angle on the uni, although I realise this will be at the expense of the springs, If you drop the front down I was thinking of cutting of old hangers, making new plates welded on chassis and have these running in line with lower chassis rail to prevent them becoming rock anchors, then make new holes and run new bolts instead of the Toyo bolts, have seen this done on a rocky running lux springs and it worked well.

(Sorry my mental picture is crap, and so is my drawing but it might explain what I'm rambling about.)

Yeh, already thought of that. Will prolly get some box section and cut it up so its like a slider and re-enforcing in one.

[Aza]

to get 2" lift out of that u would have to lower the rear one 2" as well. and yes i understood the first time

i have 2" lift in the back with just stand ifs, if i put in a 2" lift block, i would have 4" lift. i believe that would be alot easier than making new mounts. just my opinion, mayb someone on here has done it and will be able to post some pics up for u

Im gonna be running a longer shackle, longer than what ive already got. 200mm to be precise. So that would give 2" of lift at the back eye? so roughly 1" at the diff. So if i lower the front shackle 2" then it will be a true 2" lift. Geddit? Then with the lift block it would be 4".
quote]

all im saying is i already have 2 inch lift, or mayb just abit more with my current set up, which is exactly what u say u want to put in but with a lift block. i have std ifs rears on 200mm shackles (see pic)

[Gribble]

to get 2" lift out of that u would have to lower the rear one 2" as well. and yes i understood the first time

i have 2" lift in the back with just stand ifs, if i put in a 2" lift block, i would have 4" lift. i believe that would be alot easier than making new mounts. just my opinion, mayb someone on here has done it and will be able to post some pics up for u

Im gonna be running a longer shackle, longer than what ive already got. 200mm to be precise. So that would give 2" of lift at the back eye? so roughly 1" at the diff. So if i lower the front shackle 2" then it will be a true 2" lift. Geddit? Then with the lift block it would be 4".
quote]

all im saying is i already have 2 inch lift, or mayb just abit more with my current set up, which is exactly what u say u want to put in but with a lift block. i have std ifs rears on 200mm shackles (see pic)

So the 200mm shackle ends up being 4" lower than standard, giving you 2" at the axle? If thats so then its all good. I got my answer, thanx dude!

[Aza]

yes gives u 2" lift over the axle, ps i meant WITHOUT a lift block, so the 2" lift block would give u the 4" lift u woul;d need to run a track bar then aswell as it would produce axle wrap

[Gribble]

yes gives u 2" lift over the axle, ps i meant WITHOUT a lift block, so the 2" lift block would give u the 4" lift u woul;d need to run a track bar then aswell as it would produce axle wrap

Yeh, if i run lift blocks i will run a track bar.