Page 1 of 1
Replaced Govenor Diaphragm and now hunts a lot
Posted: Thu Apr 28, 2005 11:58 am
by sambo
I replaced the Govenor Diaphragm like i was suggested to do and not sure yet if it has fixed my ecconomy problem, but now it hunts quite a bit at idle.
What could be causing this???
Posted: Thu Apr 28, 2005 12:06 pm
by Sixty
Did the spring and any/all shims go back in?? Vacumn leak?
Posted: Thu Apr 28, 2005 12:11 pm
by sambo
I am pretty sure they did, I think that it only had one spring.
Posted: Fri Apr 29, 2005 8:01 am
by sambo
bump.
Posted: Fri Apr 29, 2005 11:18 am
by Sixty
Wat speed is it idling at? AFAIK it should be 650?
..no leaks from vac hoses etc...?
Posted: Fri Apr 29, 2005 12:53 pm
by sambo
It idles at around 750rpm, but i just need to adjust it as it was doing this before. So far today the hunting seems to be much better. Is it possible that it takes the diaphram a day or so to properly seal and move freely.