Page 1 of 1
drivers door quarter window
Posted: Sun May 01, 2005 7:53 pm
by yella_rangie
does anyone know about how to adjust the drivers side quarter window on a 2 door? is there a bolt that comes up from underneath? i cant open the window without it falling out!!!! i think the bolt thing is pretty rusted so if i have to i would like to be able to remove the whole frame and weld something in there . can the frame be removed?
thanks in advance
Posted: Sun May 01, 2005 8:40 pm
by Loanrangie
You will need to remove the whole window frame, the 1/4 vent is held in position at the bottom with a long bolt with a spring and nut. these usually rust out and good ones are hard to find. You may be able to fab up a repair or make them fixed.
Posted: Mon May 02, 2005 9:39 am
by yella_rangie
yep no worries. it is pretty rusted ou so i will rty to fab something up. how do i remove the frame? im guessing being a rover i have to remove the entire door?
Posted: Mon May 02, 2005 10:48 am
by Loanrangie
Look down either side of the door and you will see bolts that once removed, the whole frame will just lift out. you will need to remove the rubber seal from around the top of the door - do this carefully as they are easy to tear.
Posted: Mon May 02, 2005 11:11 am
by yella_rangie
thanks dude...looks like another weekend job!!!