Outer Limits 4x4 Board

Anyone got any pics?? Anything you would change if you have done it or do differently??

Thanks

Mate of mine put a Toyota hook on top on his Disco , just outside the upright. I am assuming Disco and 110 are similar
BUT he didn't plate it and the top buckled because it is thin.
I think the best place is on top next to the upright , and the bumper mount, but plate underneath with say 1/4 inch plate, about 80mm square at least.
Reagdrs Philip A.

I had 2 front towing eyes installed by ARB to my Defender with std L/R factory bar. They removed bar to fit and reinforced with 6 mm plate. Eyes mounted outboard of chasis rails but level with them. No problem with snatch recoveries or double line winching. Only drawback is have to use shackles to attach straps etc.

my bar is a TJM bar

i have 2 hooks either side of the uprights





cheers hiline