I'm doing a bitsa cv to uni front axel conversion and need to know if cv's are full floating within swivel housings or is the cv posistion within the swivel housing set by the stub axel circlip? I'm thinking the circlip stops the cv hitting the ball housing when travelling straight ahead and the cv self centres when turning.
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
are cv's full floating in swivel housings?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
The toy CV is full full floating, some others aren't. CV's are supposed to be located by a circlip on one side and a brass bush on the other side they won't self center - they need to be correctly located to +/- a couple of mm. To fit the toy CV to the rover swivel you need a brass bush that is off the shelf from jacmac in melbourne, or you can machine your own.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Who is online
Users browsing this forum: No registered users and 0 guests