Mickey Thompson Wheels
Posted: Thu May 05, 2005 6:35 pm
Has anyone, or does anyone know of anybody fitting a set of Mickey Thomson Classic 2's to a Patrol, I would like to put a set of 15x10's on an MQ wagon
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
Mickey Thompson Wheels
Page 1 of 1
Posted: Thu May 05, 2005 6:37 pm
I will try the pic again
Posted: Thu May 05, 2005 7:00 pm
I think they are the same ones Cheezy has , but on a GQ not MQ.
Re: Mickey Thompson Wheels
Posted: Thu May 05, 2005 8:23 pm
they look sweet!!! what sorta$
Re: Mickey Thompson Wheels
Posted: Thu May 05, 2005 9:25 pm
bogged wrote:they look sweet!!! what sorta$
I think Cheezy said they are about $300 each for the 15x8s
Re: Mickey Thompson Wheels
Posted: Thu May 05, 2005 9:43 pm
MKPatrolGuy wrote:bogged wrote:they look sweet!!! what sorta$
I think Cheezy said they are about $300 each for the 15x8s
mayday...
Posted: Thu May 05, 2005 11:19 pm
I 've been told they are about $320 for the 15x10's plus about another $15 each to machine out the centre to suit the Patrol hub, cause the Seppo's dont make em for the Patrol, so you need to get the Landcruiser ones, so I hope the offset is sweet
Posted: Thu May 05, 2005 11:26 pm
Hoppy11 wrote:I 've been told they are about $320 for the 15x10's plus about another $15 each to machine out the centre to suit the Patrol hub, cause the Seppo's dont make em for the Patrol, so you need to get the Landcruiser ones, so I hope the offset is sweet
I would be measuring all before purchasing! interested to see photos of em when you get em.. what black round rim protectors you going to run on em?
Posted: Thu May 05, 2005 11:44 pm
Saw them on a Jeep last weekend. They are a very nice rim 
Posted: Fri May 06, 2005 5:29 pm
I got em on my gq and they are a good lookin rim.
I could not run the cap on the rear though as it was tightning up on the hub before the rim would.
Also make sure you get the right wheel nuts with the right taper.
I could not run the cap on the rear though as it was tightning up on the hub before the rim would.
Also make sure you get the right wheel nuts with the right taper.
Posted: Fri May 06, 2005 7:17 pm
dont know where you are hoppy but it would be worth while talking to ryan at fourby's..... tell him i sent you and he'll look after you on rims and tyres...... freight etc
cheers
bingham
cheers
bingham
Posted: Fri May 06, 2005 11:39 pm
fatassgq
So is the Landcriuser offset sweet then??
Which wheel nuts do I ask for.
So is the Landcriuser offset sweet then??
Which wheel nuts do I ask for.
Posted: Sat May 07, 2005 12:40 pm
Yep they seem to be good. Looks fat.
Just make sure the taper is right to suit the wheel. If you buying new it should be all cool.
Sometimes if the taper is not right the nut will bottom out before the taper can hold the wheel tight if ya get what I am saying.
My prob was I bought secondhand and also had lock nuts.
They are sweet rims. Just do it!!!
Just make sure the taper is right to suit the wheel. If you buying new it should be all cool.
Sometimes if the taper is not right the nut will bottom out before the taper can hold the wheel tight if ya get what I am saying.
My prob was I bought secondhand and also had lock nuts.
They are sweet rims. Just do it!!!