Page 1 of 1

Wiring Diagram - Warn Winch

Posted: Sun May 08, 2005 5:45 pm
by profpinz
Has anyone got a wiring diagram for an older 3 solenoid control unit used on the early 2 post motors.

Thanks

Posted: Sun May 08, 2005 7:14 pm
by eddie
have a look at

www.warn.com

eddie

Posted: Sun May 08, 2005 7:25 pm
by profpinz
Tried that earlier, but nothing unfortunately :cry:
Google came up with a few sites, but all info is on the later 4 solenoid units, not the 3.

Posted: Tue May 10, 2005 7:39 am
by dumbdunce
is this a permanent magnet motor? are all the solenoids identical and are they single pole/single throw? (how many terminals do they hve on them?)

Posted: Tue May 10, 2005 8:44 am
by RoldIT
E-mail them.

A mate got some good info out of them about an older industrial spec winch just be dropping them an e-mail. Make sure you include S/N and P/N of all the bits if you have them. Apparently he got a response pretty quickly too.

Posted: Wed May 11, 2005 11:51 am
by profpinz
is this a permanent magnet motor? are all the solenoids identical and are they single pole/single throw? (how many terminals do they hve on them?)


Yep, permanent magnet motor!
Two of the solenoids are double throw and the third a single!

The two double throws have 4 main terminals (two top, two on the sides) and the single has just two main terminals on the top.
Some of the terminals are linked with copper bars.

Thanks!

Posted: Wed May 11, 2005 11:54 am
by profpinz
G'Day Kris,

Well that's my final option!
I initially thought a wiring diagram would be pretty easy to come by.....Wrong!! :)

........so I'm fast thinking that is the best option.