Page 1 of 1
15x8 rims
Posted: Mon May 09, 2005 11:41 am
by grumpy221
ok went to buy some new rims today and cannot get 15x8's in a 0 offset seems they dont even make them.
re:
http://www.outerlimits4x4.com/PHP_Modul ... 5&start=30
Posted: Wed May 11, 2005 7:50 pm
by Glennb
Hi paul I took a picture of my 15x8 pajero/Navara off set
Were the black line is, is a roughly a 10mm off set from the outside of the wheel, with a 15x7 this would be flush with the outer part of the wheel.
Hope this helps
Glenn
See how they dont stick out too far either
Posted: Thu May 12, 2005 10:02 am
by Noisey
Have you tried "Procomp".
I bought mine from there and run 33's on them 12.5 wide.
The fronts are dead even with the guards and the rears stick out 1 inch. You might be able to get custom through them - not sure.
worth the phone call.
Posted: Thu May 12, 2005 11:45 am
by grumpy221
Yep thanks Glenn & to all for your input and YES you CAN put 15x8's with 0 offset on a paj cause I've just done it mind you in the same breath now need some new tyres cause 2 of them have problems ...... bloody bridgstone!!!
Posted: Thu May 12, 2005 12:19 pm
by grumpy221
Posted: Thu May 12, 2005 2:02 pm
by Glennb
They look too clean
Posted: Thu May 12, 2005 2:12 pm
by -Scott-
That's interesting. I've got (what I was told was) zero offset rims on my Paj, and my tyres don't sit that far inside the front guards.
Frank, is an NH that different from NJ?
Scott
Posted: Thu May 12, 2005 9:06 pm
by grumpy221
swbpajero wrote:They look too clean
yep got to go and get them good and dirty this weekend somewhere
Posted: Sat May 14, 2005 11:08 pm
by grumpy221
offset seems to be from the middle of the rim eg 0 offset is in the middle of the rim .... -25 is 25mm further in so the wheel sits wider
Posted: Mon May 23, 2005 7:59 pm
by grumpy221
