2h Fuel Pump Adjustment.

[Cruzer!]

What have you guys done? Tried to score the 3 prong tool for the lock washer and havent had much success.

Anyone got any ideas/suggestions?

Thanks

[carts]

Make one. Get a piece of flat bar steel, drill 3 holes in it, then tap some small bolts in there. Can't remember sizes though.

There you have it. A fuel pump adjusterupperer. If I can find mine, I'll post a pic up.

[quick60]

or buy one from Toyota.
once adjusted you shouldn't need it again though

[dumbdunce]

Make one. Get a piece of flat bar steel, drill 3 holes in it, then tap some small bolts in there. Can't remember sizes though.

There you have it. A fuel pump adjusterupperer. If I can find mine, I'll post a pic up.

whose is it again, carts?

[Reddo]

Is there much gain from doing this, beside laying down a smoke screen?

[dumbdunce]

Is there much gain from doing this, beside laying down a smoke screen?

if you fit an EGT gauge and aim a mirror at the exhaust, you can finely tune the fuelling at full throttle for maximum safe power and zero smoke - so it enables you to strike the ideal balance between power and economy. it's a good idea to get your injectgors serviced first, so that your timing is as good as it can be.


cheers

Brian

[Reddo]

Is there much gain from doing this, beside laying down a smoke screen?

if you fit an EGT gauge and aim a mirror at the exhaust, you can finely tune the fuelling at full throttle for maximum safe power and zero smoke - so it enables you to strike the ideal balance between power and economy. it's a good idea to get your injectgors serviced first, so that your timing is as good as it can be.


cheers

Brian

well, i had 4 injectors done at 5000 kays ago before i ran out of cash, got the other 2 done 3500 kays ago, so thats not a worry.
How much are Exhaust gas Temperature Gauges?

[dumbdunce]

Is there much gain from doing this, beside laying down a smoke screen?

if you fit an EGT gauge and aim a mirror at the exhaust, you can finely tune the fuelling at full throttle for maximum safe power and zero smoke - so it enables you to strike the ideal balance between power and economy. it's a good idea to get your injectgors serviced first, so that your timing is as good as it can be.


cheers

Brian

well, i had 4 injectors done at 5000 kays ago before i ran out of cash, got the other 2 done 3500 kays ago, so thats not a worry.
How much are Exhaust gas Temperature Gauges?

don't remember how much my VDO one was, but they're not cheap. thing $200ish range.