Outer Limits 4x4 Board

Anyone know the valve clearances for a 720 with th4e later model motor??? (no the crappy ol 200b engine)

Its a Z24

crankycruiser wrote:Anyone know the valve clearances for a 720 with th4e later model motor??? (no the crappy ol 200b engine)

I dont know exactly off the top of my head but I do know they are printed on the tune up placard under the bonnet & sometimes on the Nissan ID plate ( I think that was only for vehicels in the 70's though but worth a look).

Failing that Inlet 0.20mm
Exhaust 0.30mm

This used to be the stantard Datsun clearance for most motors. If they are ratlling they are not butning valves

PS. Its a Z20 or Z24 engine. You can check it on the first 4 digits of the engine number.

mkpatrol wrote:PS. Its a Z20 or Z24 engine. You can check it on the first 4 digits of the engine number.

Its a Z24

C'mon.. someone must know.....