Page 1 of 1
Hillbilly locker or not
Posted: Fri May 13, 2005 10:12 pm
by whiteknight
Thinking of welding up the front diff and putting it in the rear and putting the LSD from the rear into the front..
I also have a spare LSD what if I put LSD in both front and rear but I think one of them is pretty well worn out and is probably classed as a slippery diff now..
Advice on this please...????
Posted: Fri May 13, 2005 10:24 pm
by -Nemesis-
Do you care about the wear rate of your rear tyres? A welded diff will chew them out, as the inside wheel on corners has to spin as fast as the outer, and hence is like constant burn outs...
Posted: Fri May 13, 2005 10:27 pm
by benhl
i hope you like busted axles
Posted: Sat May 14, 2005 12:09 am
by plowy
just have a look on the thread on a80series lsd on this page to were dumbdunce made a very good comment in regards to fitting a lsd in the front diff
Posted: Mon May 16, 2005 3:21 pm
by Slayer
put the welded in the front. that way its not an issue unless u got the free wheelin hubs locked in.
Posted: Mon May 16, 2005 6:14 pm
by RV80
Don't waste your time with LSD up front. And dont bother
with hillbilly welded centres if your going to drive it on
the street every day, there a PITA.