Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Is this worth it? for Bundy Conversion

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 33
Joined: Fri Jan 28, 2005 7:25 pm

Is this worth it? for Bundy Conversion

Post by doddyz »

Hi guys I have came up to a decision, to replace my worn 2.4 litre petrol 22r with a 22re with fuel injection.

I got a quote for a complete engine rebuild with torquer cam( mild cam), efi fuel setup, wiring of ecu loom into bundy, extractors and full installation of everything.

Broken up it is:
$2000 for efi setup and installation and wiring.
$2,200 Complete engine rebuild with mild cam and extractors.
$800 for 2nd hand engine computer and loom that they are going to rebuild.

Its going to cost me $5,000.

Just wondering if you guys think its worth it???

Here is the list what they are going to do:

Remove existing engine
Supply and fit new steel fuel line
Supply and fit surge tank
Supply and fit low pressure fuel pump
Supply and fit high pressure fuel pump
Supply and fit necessary plumbing for fuel system
Supply and fit EFI fuel filter
Supply and fit low pressure fuel filter
Integrate EFI wiring loom into vehicle (standard Toyota engine management system)
Supply and fit intake pipe and air flow meter to suit (depending on complexity of customers demands)
Supply and fit extractors
Supply and fit rebuilt 22RE engine
Dyno run in and engine check
Replace front and rear diff oil, transfer and gearbox oil (Labour Only, oil cost approx $120)
Exhaust system can be organized by us and will be charged out at our cost (approx $300)

Rebuilt engine includes 6 month Limited Workmanship Warranty.
The engine will be rebuilt as follows with top quality parts:

New Pistons
New Rings
New freeze plugs
New Main and Bigend Bearings, including thrust washers
New Conrod small end bushes
New timing chain set with steel guide
New Timing case cover
New Oil Pump
New Water Pump
Crank Re-grind
Block decked
Bore and Hone cylinders
Recondition Cylinder head
New Camshaft (268° advertised duration, .425" gross valve lift)
New leads and plugs
Injectors cleaned
New oxygen sensor
Oil and filter


Total $5000.00
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

you could probably get one of those toyota v8's for the same cost man :/

wont be a rebuild but would be a nicer engine with power to spare
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest