Outer Limits 4x4 Board

Posted: **Mon May 16, 2005 5:42 pm**

Anyone know of a site where there is a step by step DIY welding a front diff thing. Mainly just after a "How to do".

Cheers.

Posted: **Mon May 16, 2005 5:47 pm**

Best advice, if you don't already know get someone who does to show you.

Posted: **Mon May 16, 2005 6:50 pm**

search!
http://www.outerlimits4x4.com/PHP_Modul ... +side+gear
http://www.outerlimits4x4.com/PHP_Modul ... +side+gear
http://www.outerlimits4x4.com/PHP_Modul ... +side+gear
http://www.outerlimits4x4.com/PHP_Modul ... +side+gear

dude there is billions of threads on this.

cheers

Brian

Posted: **Mon May 16, 2005 7:29 pm**

I do a search but I must be a moron cause it always comes up with sh*tloads of posts with no relevance. Thanks Dumbdunce! :oops:

Posted: **Tue May 17, 2005 7:28 am**

Dangerous Dave wrote:I do a search but I must be a moron cause it always comes up with sh*tloads of posts with no relevance. Thanks Dumbdunce!

the search is a bit of a dog - you have to make sure you pick relevant terms, and you have to make sure you check the "Search for ALL terms" button - if not, any post that has any one of your search terms will be returned.

as an example, try searching for the terms

diff centre welding gears

first search for "any terms" - about 10,000 matches. no good.

then search for "all terms" - 9 matches - very good (some I hadn't posted before)

cheers

Posted: **Tue May 17, 2005 5:41 pm**

from experience....I wouldnt try it yourself mate.

Posted: **Tue May 17, 2005 6:30 pm**

just thought i would add my (young dumb) attempt/learning was when i was working at welding shop, i had an old 3.5l v3 rover.. from memory it had a banjo type, so pulled axels and took center into work, where i layed about 1kg out of a 3phase mig. just filled the 4 corners between side and plantery gears, reassembly was a shocker, and when i got it moving, i soon relised that the side gears had cocked abit, and jamming it all up 90deg of rotation, so,, new diff ,, hmm, but i have a yn67 88" lux now, and welding the front is my next step, cause you can unlock it,

Posted: **Wed May 18, 2005 11:37 am**

phreak wrote:from experience....I wouldnt try it yourself mate.

From my experiance I definantly would if your prepared to put up with the extra tire where and if you weld the absolute crappa out of it first time around so it doesnt break :twisted:

Posted: **Wed May 18, 2005 1:12 pm**

i don't think he meant don't get it welded up. I think he means don't do the job yourself.

Posted: **Wed May 18, 2005 2:55 pm**

sierrajim wrote:i don't think he meant don't get it welded up. I think he means don't do the job yourself.

Sure, if you cant weld....dont weld your diff yourself :lol:

Posted: **Wed May 18, 2005 5:57 pm**

phreak wrote:from experience....I wouldnt try it yourself mate.

yeah but your a dick head

Posted: **Wed May 18, 2005 6:08 pm**

^^^

BAHAHAHA! served...

Posted: **Wed May 18, 2005 6:08 pm**

mud iux wrote:
phreak wrote:from experience....I wouldnt try it yourself mate.
yeah but your a dick head

Posted: **Wed May 18, 2005 8:27 pm**

mud iux wrote:
phreak wrote:from experience....I wouldnt try it yourself mate.
yeah but your a dick head

With such a witty retort, I'm shocked you're still a "waste water tecnhican" . :roll:

Posted: **Wed May 18, 2005 9:16 pm**

yay lets play guessing games its fun

Posted: **Wed May 18, 2005 9:59 pm**

phreak wrote:
mud iux wrote:
phreak wrote:from experience....I wouldnt try it yourself mate.
yeah but your a dick head

With such a witty retort, I'm shocked you're still a "waste water tecnhican" .

i think phreaks in love it is phreaky he knows so much about me :lilangel:

Posted: **Thu May 19, 2005 9:56 am**

mud iux wrote:
phreak wrote:
mud iux wrote:
phreak wrote:from experience....I wouldnt try it yourself mate.
yeah but your a dick head

With such a witty retort, I'm shocked you're still a "waste water tecnhican" .
i think phreaks in love it is phreaky he knows so much about me

Whats the salary like when your a Phreak F*cker?

Outer Limits 4x4 Board

Info needed on welding diffs.

Info needed on welding diffs.

yeah